Your single point of reference for all your Geotechnical Inquiries

Equipment

Total Items found:
Vebe Consistometer
The vebe test is a variation of the simple slump test where the concrete is subject to vibration after removal from the slump cone to determine the workability of fresh concrete.
ADVANTEST 9, Servo-hydraulic control console
Servo-hydraulic system for static and low frequency dynamic tests on building materials under control of Load/Stress, Displacement Strain.Ideal both for traditional tests, such as compression and flexure on concrete, cement, mortar, blocks etc. and cyclic ...
Air and Water permeability test set. John Figg method
This method covers the determination of susceptibility to chloride and carbonation penetration into the concrete.
Air Entrainment Meter
<p>The Air Entrainment Meter is used to determine air content of fresh concrete. The meter measures up to 22% entrained air with an accuracy of ±0.25% at full scale. It is appropriate for aggregates size of maximum 50mm.</p>
Air entrainment meters
The EN and ASTM standards describe two methods for the determination of air content of compacted fresh concrete which is a very important parameter for the behavior of concrete to weathering and to verify the air content variation due to the use of chemical ...
ASTM C39, AASHTO T22 Compression frames
50-C12Z00, 50-C22Z00 and 50-C32Z00, 1500 to 3000 kN cap., frames consist of a rigid welded steel structure, with spherical seat and platens 165 mm dia., suitable for testing cylinders from dia. 4”x8” to 6”x8” as prescribed by ASTM C39 standard. The vertical ...
Automax SMART line, fully automatic tester
This modern and advanced unit has been designed to fit all our models of compression and flexural frames ranging from 100 to 5000 kN capacity.The AUTOMAX System is usually proposed as part of the compression machines (AUTOMAX, Super- Automatic EN testers for ...
AUTOMAX, Super- Automatic EN testers for cubes, cylinders and blocks
The AUTOMAX Compact-Line, Super-Automatic compression testers, adopting the innovative CVI TECH concept, is the result of our continuous application and research to upgrade testing machines with the last technologies, taking into account client requirements ...
AUTOMAX, Super-Automatic ASTM testers for cylinders
The AUTOMAX Compact-Line, Super-Automatic compression testers, adopting the innovative CVI TECH concept, is the result of our continuous application and research to upgrade testing machines with the last technologies, taking into account client requirements ...
Beam moulds
55-C0100/MB10 Concrete beam mould, 100x100x400 mm. Weight 17.5 kg55-C0100/MB15 Concrete beam mould, 150x150x600 mm. Weight 33.5 kgPlastic model 55-C0100/PB11 Plastic beam mould, 100x100x500 mm. Weight 2 kg