Your single point of reference for all your Geotechnical Inquiries

Latest Geotechnical Equipment

Total Items found:
<p>In late 2009 the U.S. Geological Survey (USGS) and National Park Service (NPS) joined into a collaborative research project to investigate the deformation of large, vertically-oriented, granite slabs in response to thermal heating and solar radiation. The ...
<p>The 100 series system offers the greatest realistic penetration that GPR can provide. It is used for locating deeper targets up to 100' deep. It is typically used to locate tunnels and for geophysical analysis. The electronics are interchangeable with our ...
<p>The LC-2&times;16 is similar to the Model 8002-4 (LC-2&times;4), but provides 16 channels of vibrating wire (with thermistor). The LC-2&times;16 is powered by 4 alkaline &lsquo;D&rsquo; cells (or from an external 12V source). The datalogger is housed inside ...
Filed under: Monitoring -  Datalogger
<p>The LC-2&times;4 is a self-contained multi-channel version of the Model 8002-1 (LC-2). The LC-2&times;4 provides 4 channels of vibrating wire (with thermistor) and is powered by two &lsquo;D&rsquo; cells or by solar panel for remote long-term applications. ...
Filed under: Monitoring -  Datalogger
<p>Simply put, the 500 Series is a buried utility location workhorse. It is easy to use yet it can be expanded and configured for other applications and needs down the road. With its unique range of integrated technologies, it is the most powerful GPR on the ...
<p>The Model 8600 Series Dataloggers are designed around the Campbell Scientific, Inc. (CSI) Model CR6 Measurement and Control System. Although primarily manufactured for use with vibrating wire sensors and thermistors, the Model 8600 Series can be configured, ...
Filed under: Monitoring -  Datalogger
<p>A-Jacks protects channel boundaries from scour and erosion by dissipating energy to resist the erosive forces of flowing water. A-Jacks armor units are assembled into continuous, flexible matrix modules which provide protection against high velocity flows.<br ...
<p>The Model 8020-30 Addressable Interface is designed to &ldquo;daisy-chain&rdquo; vibrating wire sensors on a single 4-conductor cable, using the Modbus&reg; RTU protocol over an RS-485 connection. It is particularly useful for reducing cable runs in multipoint ...
Filed under: Monitoring -  Datalogger
<p>Analog Extensometer is a sensor of electric current output type to measure displacement on the ground surface. The displacement is measured by change of the wire length between two (2) points that one is at a fixed site and another is at a moving area. ...
<p>Analog Water Level Meter measures water level and water temperature at a same time by one (1) probe. The probe is slim size with 18 mm in diameter only. User can use this for small size of monitoring well/hole.<br />Monitoring data is read out by electric ...