Your single point of reference for all your Geotechnical Inquiries

Equipment by [Geosense Ltd]

Total Items found:
<p>The DT2055 is a low-cost, battery powered data logger, designed for reliable, unattended monitoring of up to 10 sensors which may be any mix of vibrating wire sensors and thermistors, typically 5 vibrating wire sensors with their associated thermistors.</p> <p>It ...
Filed under: Monitoring -  Datalogger
<p>The DT2040 40 Channel Data Logger is a low-cost, battery powered data logger, designed for reliable, unattended monitoring of up to 40 sensors which may be any mix of vibrating wire sensors and thermistors, typically 20 vibrating wire sensors with their ...
Filed under: Monitoring -  Datalogger
<p>The Digital Tilt Logger is a low cost, battery-powered data logger and tilt meter in a single compact unit. It measures tilt in either one or two perpendicular axes in the plane of the base. The unit is intended to be permanently installed to provide long-term ...
Filed under: Monitoring -  Datalogger
<p>Particularly suitable for the long-term monitoring of concrete structures.</p> <p>Consists of two end flanges with a tensioned steel wire between them. As concrete undergoes strain, the end blocks will move and the tension in the wire changes. A vibrating ...
<p>The Flexi-Mux allows a single channel of data loggers such as the Campbell CR1000 to be sequentially connected to numerous sensors. Each Flexi-Mux can sequentially multiplex 5 groups of 4 lines for a total of 20 lines. Alternatively, internal DIP switch ...
Filed under: Monitoring -  Datalogger
<p>The Geosense&reg; Geologger GL101A-V is a small, portable, battery powered datalogger system for use with instruments that output in voltage.</p> <p>Each unit comes with datalogger software, with real time graphing and varying sampling times.</p> <p>We ...
Filed under: Monitoring -  Datalogger
<p>The GeoLogger GL Series is built around the Campbell Scientific CR800 and CR1000 control modules and offers reliable remote monitoring under demanding geotechnical conditions.</p> <p>Functions include sensor measurement, timekeeping, data reduction, data ...
Filed under: Monitoring -  Datalogger
<p>Geosense® VWPHT-3600 high temperature vibrating wire piezometers are suitable for the extreme environments of temperature and pressure found in applications such as tar, sand and deep geothermal energy extraction. They use the well-proven technology of ...
<p>MEMS In-Place Tilt Meters are designed to measure uniaxial or biaxial tilt, which is measured from the plane(s) perpendicular from the base unit. They are designed to be installed permanently in either the vertical or horizontal position by either bonding ...
<p>Geosense® QJ Inclinometer Casing is a quick connecting casing, precision extruded from ABS, with four precise keyways formed at 90 degrees which allow accurate installation of portable and in-place inclinometers. The quick connecting joint makes it faster ...