Your single point of reference for all your Geotechnical Inquiries

Equipment tagged with [water measurements]

Total Items found:
<p>The Model 4500DP Drive Point Piezometer has the transducer located inside a housing with an EW drill rod thread and removable pointed nose cone. This model is ideally suited for use in peat and soft clays. The piezometer may be recovered at the end of the ...
<p>The FPC-2 pneumatic piezometer consists of a thin flexible diaphragm on which is applied the fluid pressure. During readout this pressure is balanced by an externally applied nitrogen gas pressure. The readings are obtained when the external gas pressure ...
<p>The Model 4500HD Heavy Duty Piezometer is designed for direct burial in fills and dam embankments. The 4500HD is used in conjunction with heavily armored cable to withstand earth movements during construction. Recommended for use in earth dams.<br>Specifications<br>Standard ...
<p>The KLL-Light Electric Contact Meter is equipped with a signal buzzer as well as a signal lamp (signal-LED). On deploying the probe into the borehole, well, reservoir or other, the lamp and buzzer signals will indicate when the probe touches the water-level ...
<p>The Model 3400 Semiconductor Piezometers and Pressure Transducers are intended for dynamic measurements of fluid and/or pore water pressures in standpipes, boreholes, embankments, pipelines, pressure vessels, reservoirs, etc. They are also used for static ...
<p>These piezometers are uniquely designed to enable the automation of small diameter, non-standard piezometer standpipes. The 4500B will fit inside 19 mm pipe and the 4500C will fit inside 12 mm pipe.<br>Specifications<br>Standard Ranges: 4500B | −100 to ...
<p>The Model 4500 Standard Piezometer is designed to measure fluid pressures such as ground water elevations and pore pressures when buried directly in embankments, fills, etc. Also for installation inside boreholes, observation wells and standard (&gt;19 ...
<p>The V-Notch (triangular) Weirs are typically installed in open channels such as streams to determine discharge (flow rate). The main component is a cylindrical weight suspended from a vibrating wire force transducer. As the water level changes, the changing ...
<p>Dipmeters are used for water ground level measurements in standpipes, wells and Casagrande piezometers. It is a battery powered portable device equipped with a dipping probe connected to a graduated cable wrapped on a cable reel. In contact with water the ...