Your single point of reference for all your Geotechnical Inquiries

Equipment tagged with [soft soil]

Total Items found:
<p>The Geovane is a hand-held instrument used for determining soil shear strength providing the reading in kPa. The device is simple to use. A 19mm vane blade is screwed into the base of the Geovane and the vane is pushed into the soil. Simply rotate the Geovane ...
The field vane shear test (FVST) is the most widely used method for measuring the undrained shear strength and sensitivity of soft clays in-situ. FVST is a more economic method than for example CPT as its operation does not reuire a drilling rig or highly ...
The field vane shear test (FVST) is the most commonly used method for measuring the undrained shear strength of soft to stiff clays. For this reason a preliminary investigation of soft clayes with a hand held tester is both economic and fully relevant. The ...
<p>The Geonor H-60 hand-held vane tester is a fully professional instrument for preliminary FVST investigations. Each unit is delivered with its individual calibration certificate. The authentic Geonor H-60 was originally developed in 1966 by the Norwegian ...
The Geonor H-70 field inspection vane tester was originally developed in Norway for the special task of preliminary investigations in soft clays without preboring. It is a comparatively low cost still fully professional instrument. The Geonor H-70 allows for ...
The Geonor thin wall stationary piston samplers are designed for taking undisturbed cores in very soft to stiff clayes. Excellent undisturbed samples are also obtained in loose to medium dense sands if the bore hole is filled with drilling mud. With a sampling ...
<p>The Humboldt H-4212MH Pocket Shear Vane Tester provides a quick and efficient method for determining shear strength values of cohesionless soils. The Pocket Shear Vane is widely used for taking on-site measurements of excavations, including trenches and ...
<p>The H-4212 Pocket Shear Vane Tester provides a quick and efficient method for determining shear strength values of cohesionless soils. The Pocket Shear Vane is widely used for taking on-site measurements of excavations, including trenches and test pits. ...
<p>The Vane Inspection Set provides a rapid check of the stability of foundations, excavations and trenches in clay. The total range is 0 to 260kPa (0 to 2.6 ton/sq. ft.). The scale built into the handle holds the peak value until reset. Accuracy is ±10%. ...