Your single point of reference for all your Geotechnical Inquiries

[Total Pressure Cells] Equipment

Total Items found:
NATM Style Shotcrete Stress-Model 4850
<p>The Model 4850 NATM Style Shotcrete Stress Cells are designed for the measurement of tangential (4850-1) and radial (4850-2) stresses in shotcrete tunnel linings. The cells consist of two rectangular steel plates welded together around the periphery with ...
Pile Tip Pressure Cell-Model 4855
<p>The Model 4855 Pile Tip Pressure Cell is used to measure pile-tip loads in cast-in-place concrete piles (caissons). Like the Model 4810, the Pile Tip Pressure Cell has a thick upper plate. The cell is manufactured to be close to the diameter of the pile ...
Total Pressure Cells
<p>The total pressure cell is formed from two circular plates of stainless steel. The edges of the plates are welded together to form a sealed cavity, which is filled with fluid. Then a pressure transducer is attached to the cell. The cell is installed with ...
TPC Total Pressure Cell
<p>The TPC cells consist of a sealed distribution pad, composed of two plates welded together around the periphery and filled with de-aired oil. The pad is connected via a length of steel tube to a pressure transducer. Variation in oil pressure resulting from ...
Vibrating Wire NATM Stress Cell
<p>RST Vibrating Wire NATM Stress Cells are designed to measure stresses in concrete (shotcrete) linings in tunnels and other underground workings</p>