Your single point of reference for all your Geotechnical Inquiries

Publications tagged with [rockfall simulation]

Total Items found:
This dissertation contributes to the improvement of the predictive accuracy of the impact capacity of rockfall protection galleries and to the establishment of a performance-based design procedure for these structures. Furthermore, it facilitates the understanding ...
Filed under: Rock Mechanics -  Rock Falls
Reference: Institute of Structural Engineering Swiss Federal Institute of Technology Zurich
<p>This report outlines detailed 3D rockfall modelling of multiple areas within the Canterbury Port Hills near Christchurch, New Zealand. It includes a rockfall hazard assessment for the area. This analysis will provide Canterbury Earthquake Recovery Authority ...
Filed under: Rock Mechanics -  Rock Falls
Reference: Geovert Ltd, Ports Hills CERA (Canterbury Earthquake Recovery Authority)
Rockfall is an extremely rapid process involving long travel distances. Due to these features, when an event occurs, the ability to take evasive action is practically zero and, thus, the risk of injury or loss of life is high. Damage to buildings and infrastructure ...
Filed under: Rock Mechanics -  Rock Falls
Reference: Nat. Hazards Earth Syst. Sci., 11, 2617–2651, 2011
Rockfall propagation areas can be determined using a simple geometric rule known as shadow angle or energy line method based on a simple Coulomb frictional model implemented in the CONEFALL computer program. Runout zones are estimated from a digital terrain ...
Filed under: Rock Mechanics -  Rock Falls
Reference: Nat. Hazards Earth Syst. Sci., 11, 819–828, 2011
An important issue in the evaluation of potential hazard related to rockfalls is the quantitative prediction of the traveling distance of the falling blocks, which is necessary to identify the potentially endangered area. This information is also fundamental ...
Filed under: Rock Mechanics -  Rock Falls
Reference: 18th World IMACS / MODSIM Congress, Cairns, Australia 13-17 July 2009
The highway between Aswan and Cairo on the eastern bank of the Nile Valley is one of the most used highways in Egypt, connecting most of the governorates with each other. It represents the backbone of Egyptian transportation and commercial traffic. This Highway ...
Filed under: Rock Mechanics -  Rock Falls
Reference: JKAU: Earth Sci., Vol. 20, No. 2, pp: 161-181 (2009 A.D. / 1430 A.H.)
The accuracy of rockfall trajectory simulations depends to a large extent on the calculation of the rebound of falling boulders on different parts of a slope where rockfalls could occur. The models commonly used for rebound calculation are based on restitution ...
Filed under: Rock Mechanics -  Rock Falls
Reference: Geomorphology 110 (2009) 68–79
We used one of the few rockfall models explicitly taking trees into account and compared the results obtained with the 3D simulation model RockyFor with empirical data on tree impacts at three mountain forests in Switzerland. Even though we used model input ...
Filed under: Rock Mechanics -  Rock Falls
Reference: Forest Ecology and Management 225 (2006) 113–122
Anglo Coal South Africa mines coal for both the domestic and export market using open cast and strip mining methods. To establish a mine, a process is set in place to gather ever increasing amounts of geological and metallurgical data to confirm a proven reserve. ...
Reference: The South African Institute of Mining and Metallurgy, International Symposium on Stability of Rock Slopes in Open Pit Mining and Civil Engineering
The Strug landslide was triggered in December 2001 as a rockslide, followed by a rock fall. In 2002, about 20 debris flows were registered in the Kose˘c village; they were initiated in the Strug rock fall source area. They all flowed through the aligned Brusnik ...
Filed under: Rock Mechanics -  Rock Falls
Reference: Nat. Hazards Earth Syst. Sci., 6, 261–270, 2006