Your single point of reference for all your Geotechnical Inquiries

Publications in

Pavement forms roads, highways, runways, parking lots and other everyday structures. Pavement is among the most important structure for transportation development and operation. In Pavement section, publications covering geotechnical issues of pavement, asphalt pavement, concrete pavement, pavement design, pavement rehabilitation etc are included.
Total Items found:
<p>Highway and pavement design plays an important role in the DPR projects. The satisfactory performance of the pavement will result in higher savings in terms of vehicle operating costs and travel time, which has a bearing on the overall economic feasibility ...
Filed under: Pavement -  Pavement Design
Reference: International Journal of Engineering Research and Applications, Vol. 3, Issue 5, Sep-Oct 2013, pp.119-123
<p>Churchill Falls Airport is located in Churchill Falls, Labrador and is owned and operated by Nalcor Energy Company. The airside pavements at the airport include Runway 13-31, Taxiway Alpha and an apron. There is relatively limited aircraft traffic at the ...
Filed under: Pavement -  Pavement Design
Reference: 2013 Conference of the Transportation Association of Canada Winnipeg, Manitoba
This report discusses the use of hot in-place recycling, cold in-place recycling, and full-depth reclamation of asphalt pavements. In-place recycling and reclamation of asphalt pavements provides agencies with the ability to optimize the value of in-place ...
Filed under: Pavement -  Asphalt Pavement
Reference: NCHRP Synthesis 421, TRB
 
A Manual for Design of Hot-Mix Asphalt with Commentary presents special mixture design considerations and methods used with warm-mix asphalt.
Filed under: Pavement -  Asphalt Pavement
Reference: NCHRP Report 714, TRB
The new Concrete Society Publication, Cementitious Materials, CSTR74, covers the effects of cementitious materials - blast furnace slag (GGBS), fly ash (FA), limestone fines and silica fume (microsilica) on the properties of concrete. This paper focuses on ...
Reference: 37thConference on OUR WORLD IN CONCRETE & STRUCTURES: 29 - 31 August 2012, Singapore
 
A Manual for Design of Hot-Mix Asphalt with Commentary presents special mixture design considerations and methods used with warm-mix asphalt.
Filed under: Pavement -  Asphalt Pavement
Reference: NCHRP Report 673, TRB
This report presents processes for conducting systematic evaluations of pavement alternatives and for making decisions on pavement-type selection.
Filed under: Pavement -  Pavement Design
Reference: NCHRP Report 703, TRB
Warm mix asphalt (WMA) refers to asphalt concrete mixtures that are produced at temperatures approximately 50F (28C) or more cooler than typically used in the production of hot mix asphalt (HMA). The goal of WMA is to produce mixtures with similar strength, ...
Filed under: Pavement -  Asphalt Pavement
Reference: NCHRP Report 691, TRB
<p>In 1994 VicRoads adopted its &ldquo;A Stitch in Time&rdquo; pavement strategy. The essential elements of the strategy were to carry out:<br />&bull; Routine maintenance (day-to-day maintenance) where the strategic aim was to minimise the deterioration of ...
Filed under: Pavement -  Pavement Design
Reference: First International Conference on Pavement Preservation, April 12-16, 2010, in Newport Beach, California
<p>Pavement failure is defined in terms of decreasing serviceability caused by the development of cracks and ruts. Before going into the maintenance strategies, we must look into the causes of failure of bituminous pavements. Failures of bituminous pavements ...
Filed under: Pavement -  Asphalt Pavement
Reference: First International Conference on Pavement Preservation, April 12-16, 2010, in Newport Beach, California