Your single point of reference for all your Geotechnical Inquiries

Equipment by [OYO CORPORATION]

Total Items found:
<p>Analog Water Level Meter measures water level and water temperature at a same time by one (1) probe. The probe is slim size with 18 mm in diameter only. User can use this for small size of monitoring well/hole.<br>Monitoring data is read out by electric ...
<p>The AUTO LLT 2 is a borehole lateral load tester that functions to determine the deformation characteristics of the ground from the relation between pressure inside its sonde and the inflated amount of its rubber tube.<br>A conventional LLT requires gas ...
<p>Digital Q-Tilt 6000 system consists of the probe “Digital Q-Tilt 6000 (Model-4480)” to measure inclination and handy logger “Handy Logger Digital Q-Tilt (Model-4470)” to read / storage the monitoring data. These instruments are for manual monitoring using ...
<p>Digital Q-Tilt 6000 system consists of the probe &ldquo;Digital Q-Tilt 6000 (Model-4480)&rdquo; to measure inclination and handy logger &ldquo;Handy Logger Digital Q-Tilt (Model-4470)&rdquo; to read / storage the monitoring data. These instruments are for ...
<p>Elastometer 2 is a borehole lateral load tester that enables measurement of stress and deformation characteristics of the wide range ground from soft rock to hard rock. It is effective for the foundation design of large-scale structures such as high-rise ...
<p>Elastmeter Sonde 4 inch (Model-4203) is a new product optimized for measurement of 100 mm diameter boreholes, which were impossible with conventional models.<br>Same as the conventional models, it enables measurement of stress and deformation characteristics ...
<p><br>The Geologger GWS3i is a combined logging system that enables simultaneous measurements of three items: natural gamma, electric logging (16″ and 64″) and spontaneous potential by connecting it to the GW Combination Probe (Model-3493).<br>After excavation, ...
<p>Integral Water Level Meter consists of water level meter &amp; data logger in the probe and power source &amp; data transmission in the top part. Every equipment / function is unified into one (1) unit as an integrated water level meter.<br>This is a remote ...
<p>The LLT-M is a borehole lateral load tester that functions to determine the deformation characteristics of the ground from the relation between pressure inside its sonde and the inflated amount of its rubber tube.<br>The instrumentation on the surface consists ...
<p>The McOHM-EL3i is a cost-effective instrument that can be applied to both electrical sounding and well logging (resistivity, temperature &amp; caliper). A color 10.1 inch LCD tablet, a large-capacity transmitter circuit part and a high-performance potential ...