Your single point of reference for all your Geotechnical Inquiries

Equipment by [Test International]

Total Items found:
<p>Inadequate abrasion resistance of road surfacing aggregates means an early loss of the texture depth required to maintain high speed skidding resistance. The Cooper-Wessex Aggregate Abrasion machine determines the Aggregate Abrasion Value by testing the ...
<p>The apparatus enables a more precise test to be conducted compared to the simple slump test. The compaction factor is a ratio of partially compacted concrete compared to fully compacted concrete.<br>Comprising two conical hoppers each with a hinged trap ...
<p>The apparatus is used for determination of setting time of the mortar fraction of fresh concrete. The apparatus consists of a spring loading device which is graduated from 2 to 150lbs, supplied complete with a set of needle points of 645, 323, 161, 65, ...
<p>The test covers the determination of the consolidated drained shear strength of a soil material in direct shear. Direct Residual Shear Machine is motorized and floor mounted. Supplied with carriage assembly load hanger and integral 10:1 lever loading device ...
<p>TS-0865 In-situ CBR Test Apparatus, 45 kN capacity, is used for the in-situ determination of the bearing capacity of soils used in road construction.<br />The set consist of:<br />- 45 kN capacity mechanical jack with ball seating,<br />- 50 kN capacity ...
<p>TS-0867 Conversion Frame is used to convert in-situ CBR test to a mechanical laboratory CBR test machine.<br>This system is obtained by the assembly of the conversion frame plus with the addition of some of the accessories included in TS-0865. The frame ...
<p>Used to determine the specific gravity of hydraulic cement and lime. Glass flask 250ml capacity, with graduated neck from 0 to 1 ml and from 18 to 24 ml in 0.1 ml graduation with accuracy of 0.05ml.</p>
Filed under: Laboratory Testing -  Cement
<p>The apparatus is designed for determination of setting time of fresh concrete for field and laboratory use.<br />Stainless steel plunger 32.3 mm&sup2; (1/20 inch&sup2;) area; plunger graduated 0-5 MPa or 0-700psi. </p>
<p>The apparatus consist of a load frame 60 kN capacity with a hydraulic loading ram actuated by a hand pump. The frame is adjustable to allow for testing samples up to 102 mm dia. A ruler assembled on the frame allows for direct measurement of the distance ...
<p>Used in the field for penetration resistance/compaction of fine grained soils. The penetrometer is spring loaded with direct reading in kg on a sliding rod.<br />Complete with 9 interchangeable stainless steel needles in the following diameters: 4.52 - ...