Your single point of reference for all your Geotechnical Inquiries

Pendulum Readout - Model 6850

The Model 6850 Pendulum Readout is designed to make accurate measurements of the relative movements of normal and inverted pendulums, such as those found in dams, and can be installed as a new system or as an electronic upgrade for an existing system. The electronics package provides both 4-20 mA and EIA RS- 485 data outputs. The data can be stored locally, or remotely, with the 8600 Series Dataloggers, or other dataloggers, and thence by hard-wire or modem to a PC. Two 2-D models are available: 50×50 mm and 50×100 mm; and one 3-D model: 50×100×50 mm. Manual sighting/reading tables with optical (LED) readout are also available where automated systems are not necessary, or where a manual reading back-up is required.

Standard Range: (2-D) X axis: 0-50 mm, Y axis: 0-50 mm
(2-D) X axis: 0-50 mm, Y axis: 0-100 mm
(3-D) X axis: 0-50 mm, Y axis: 0-100 mm, Z axis: 0-50 mm
(2-D, Manual) X axis: 0-50 mm, Y axis: 0-50 mm or 0-100 mm (specify)
Resolution: 0.01 mm
Accuracy: better than 0.1 mm
0.2 mm (2-D, Manual)
Operating Temperature: −15°C to +60°C
L × W × H: (2-D) 380 × 330 × 145 mm
(2-D) 425 × 375 × 190 mm
(3-D) 425 × 375 × 190 mm
(2-D, Manual) 356 × 356 × 100 mm



Geokon, Incorporated, 48 Spencer Street, Lebanon, New Hampshire, 03766 · USA. Tel.: 1(603)448-1562, FAX: 1(603)448-3216, e-mail:

User Rating:
You must be registered to vote.