Your single point of reference for all your Geotechnical Inquiries

Equipment by [MATEST Material Testing Equipment]

"Matest is the world leading manufacturer of material testing equipment for the construction industry. We offer advanced solutions for on site and laboratory tests on aggregates, rocks, bitumen, asphalt, concrete, cement, mortar, steel, and soils, representing the ideal partner for anyone working in building and civil engineering industries". Source: http://www.matest.com/

Total Items found:
AGGREGATE CRUSHING VALUE APPARATUS
<p>Comprising 150 mm nominal diameter steel cylinder, plunger, base plate, tamping rod and measure 115 mm diameter x 180 mm deep</p>
AGGREGATE IMPACT VALUE APPARATUS
<p>Used to determine the impact value of aggregates and select them for a given application. The machine has a trip-action hammer release, blow counter device and a built-in operator safety device. Manufactured in heavy duty form with hardened steel surfaces ...
AGGREGATES ABRASION TESTS
<p>Used to determine the resistance to abrasion and wear of concrete products and natural stones, by measuring the length of a groove produced on the specimen surface by a disc with thickness of 70 mm that rotates at controlled speed and makes a constant pressure ...
BALLOON DENSITY APPARATUS
<p>Used to determine the in-sity density of fine graded compacted or bonded soil. The apparatus is placed over the hole excavated in the soil, and water is pumped into a rubber balloon and forced into the hole. The amount of water displaced into the ballon ...
BARTON COMB PROFILOMETER 300 mm LONG
<p>Used for the evaluation of the surface roughness of rock samples. This simple device allows to a myriad of very thin steel wires to perfectly lay to the outline of the sample under test, so to allow its analysis</p>
BLUE METHYLENE TEST SET
<p>Blue methylene test set CLAY CONTENT IN FINE AGGREGATES. Utilized to determine the clay content in the fine portions of the aggregates</p>
BULK DENSITY AND VOIDS MEASURES
<p>Used to determine the loose bulk density and voids of aggregates. Stainless steel made, the 10 and 20 litres models have handles</p>
CALIFORNIA BEARING RATIO - CBR
<p>This method has been developed by the California State Highway Department, and is now accepted by almost all the International Standards in force. The test is aimed to the evaluation of the bearing capacity of soil for flexible pavement design in road construction. ...
CBR TESTING MACHINES
<p>Used to load the penetration piston into the soil sample at a constant rate of 1,27 mm/min (1 mm/min to BS Spec.), and to measure the applied loads and piston's penetrations at determined intervals</p>
CHLORIDE CONTENT, RAPID METHOD
<p>Used to estimate the chloride content of aqueous solutions in sand and fine aggregates</p>