Your single point of reference for all your Geotechnical Inquiries

Equipment by [GEOKON]

"Over the years, Geokon, Inc. has emerged as The World Leader in Vibrating Wire Technology™ due to our quality, responsive customer service and industry-leading designs. In particular, Geokon, Inc., through innovation and experience, has developed a line of vibrating wire sensors unsurpassed anywhere in the world". Source:  http://www.geokon.com/

Total Items found:
Contact Type (Semiconductor, VW) - Model 4810
<p>The Model 4810 &ldquo;Fat Back&rdquo; Pressure Cell is intended to measure contact earth pressures on the surface of concrete or steel structures. The cell has an extra thick backplate to minimize any point loading effects. &lsquo;Ears&rsquo; on the cell ...
Convergence Meters - Model 4425
The Model 4425 Convergence Meter is used to monitor closures in underground excavations, tunnels, etc. It is comprised of a spring tensioned transducer, turnbuckle, connecting rod (stainless steel, fiberglass or graphite), rod clamp, and a pair of stainless ...
Deformation Meters - Model 4430
The Model 4430 Deformation Meter with flanged ends is designed to measure longitudinal deformation in dams and embankments. It can also be grouted or held in place by hydraulic anchors to measure deformations in boreholes (over the gage length). Gage lengths ...
Digital Inclinometer System (MEMS) - Model GK-604D
<p>The Model GK-604D Digital Inclinometer System is delivered in its entirety and includes a Model 6100D Digital Inclinometer Probe, a reel-mounted cable and a Field PC. The Model 6100D contains electronics to convert the analog voltage into a digital signal, ...
Digital Tiltmeter (MEMS) - Model 6101D
<p>The Model 6101D MEMS Digital Tiltmeter is a low-cost, portable device designed to measure tilt in structures such as buildings, dams and embankments and also for measurements related to the stability of slopes, open pits and the walls of excavations (e.g. ...
Displacement Transducers (VW) - Model 4450
<p>The Model 4450 Displacement Transducer provides remote readout capability for borehole extensometers. They are particularly useful where other types of vibrating wire sensors are used and/or for installations where long cable runs are required. The Model ...
Drive Point Piezometers-Model 4500DP
<p>The Model 4500DP Drive Point Piezometer has the transducer located inside a housing with an EW drill rod thread and removable pointed nose cone. This model is ideally suited for use in peat and soft clays. The piezometer may be recovered at the end of the ...
Dynamic Embedment (Electrical Resistance) - Model 3900
<p>The Model 3900 Embedment Strain Gage is designed for the measurement of dynamic strains in concrete structures, earth fills and soils. It comprises a full bridge strain gaged proving ring coupled, between two flanges, with a spring and shaft. When the flanges ...
Dynamic Strain Transducers (Electrical Resistance) - Model ST-350
<p>The Model ST-350 Dynamic Strain Transducer is used for structural testing and recording strains on steel structures, post-tensioned and pre-stressed concrete structures, etc., and for any structure in which a short-term live-load can be applied. The Model ...
Earth Pressure - Model 4800
<p>The Model 4800 Earth Pressure Cells are designed to measure total pressure in earth fills and embankments. All cells consist of two circular stainless steel plates welded together around their periphery and spaced apart by a narrow cavity filled with de-aired ...