Geosense® XC (External Coupler) Inclinometer Casing is a precision extruded from ABS, with four precise keyways formed at 90 degrees which allow accurate installation of portable and in-place inclinometers. Standard joints are made by using external couplers which are glued to each end of the casing. Telescopic sections are riveted together to allow movement during settlement and sealed with mastic and tape to prevent the ingress of water and grout. Advantages of the XC Inclinometer casing is that it can  be cut and re-joined on site allowing maximum flexibility and makes any damage easily repairable. A full range of accessories including bottom and top caps, anchors and groutable anchors are available and can be used in conjunction with magnetic targets for combined inclinometer/magnetic extensometers.
Dimensions: 70, 85mm
Material: ABS (Acrylonitrile-butadiene-styrene)
Groove spiral: < 0.3°/3m
Tensile strength: 40 MPa
Coefficient of linear thermal expansion: 9 x 10-5 mm/mm °C
Flexural modulus @ 23 deg C: 20 Kg/cm²
Collapse resistance: ~ 1800kPa
Temperature range: -20°C to +70°C
Colour: Natural (other available on request)

Geosense Ltd
Nova House
Rougham Industrial Estate
Rougham, Bury St Edumunds
Suffolk IP30 9ND
ENGLAND
T +44 (0)1359 270457
F +44 (0)1359 272860
info@geosense.co.uk