Your single point of reference for all your Geotechnical Inquiries
[Vibrating Wire Piezometer] Equipment
Total Items found:
<p>The 4-20mA Piezometer is designed for accurately measuring pore water pressures in fully or partially saturated soil and rock. The transducer is fitted with a sintered Stainless Steel filter disc and is available as a vented (gauge) piezometer or a non-vented ...
Filed under:
Monitoring -
Ground Water Pressure
<p>The Model 4500AR “Autoresonant” Piezometer is designed for use with existing data acquisition systems incapable of reading standard (pluck and read) vibrating wire sensors. It can also be used where low frequency (< 20 Hz) dynamic measurements are required. ...
Filed under:
Monitoring -
Ground Water Pressure
<p>The Model 4500DP Drive Point Piezometer has the transducer located inside a housing with an EW drill rod thread and removable pointed nose cone. This model is ideally suited for use in peat and soft clays. The piezometer may be recovered at the end of the ...
Filed under:
Monitoring -
Ground Water Pressure
<p>The Model 4500HD Heavy Duty Piezometer is designed for direct burial in fills and dam embankments. The 4500HD is used in conjunction with heavily armored cable to withstand earth movements during construction. Recommended for use in earth dams.<br>Specifications<br>Standard ...
Filed under:
Monitoring -
Ground Water Pressure
<p>The Heavy Duty Vibrating Wire Piezometer accurately measures pore water pressures in fully or partially saturated soil. The heavy duty design prevents case stresses from affecting readings in extreme installations (dams and high ground stresses). The transducer ...
Filed under:
Monitoring -
Ground Water Pressure
The Geonor M-600 series piezometers are vibrating wire sensors which are installed by pushing into soft and loose soils without having to drill or borehole. As with all other Geonor vibrating wire piezometers, the M-600 series offer the maximum relibility ...
Filed under:
Monitoring -
Ground Water Pressure
<p>The 4500HT Series High Temperature Piezometers are designed for monitoring downhole pressures and temperatures in oil recovery systems and geothermal applications, where the temperature may be as high as 250°C. These sensors are supplied with either ...
Filed under:
Monitoring -
Ground Water Pressure
<p>Geosense® VWPHT-3600 high temperature vibrating wire piezometers are suitable for the extreme environments of temperature and pressure found in applications such as tar, sand and deep geothermal energy extraction. They use the well-proven technology of ...
Filed under:
Monitoring -
Ground Water Pressure
<p>The Geonor M-600 series piezometers are vibrating wire sensors which are installed by pushing into soft and loose soils without having to drill a borehole. As with all other Geonor vibrating wire piezome¬ters, the M-600 series offer the maximum reliabi¬lity ...
Filed under:
Monitoring -
Ground Water Pressure
The Geonor M-610 series are vibrating wire piezometers used for direct burial in embankmnets and earth / rockfill dams, for placement in boreholes, and for water level monitoring in open wells, tanks and opne bodies of water. As all other Geonor vibrating ...
Filed under:
Monitoring -
Ground Water Pressure