Your single point of reference for all your Geotechnical Inquiries

Equipment by [Sisgeo S.r.l]

Total Items found:
<p>The OMNIAlog has been designed “in house” by Sisgeo and is the result of over 25 years experience using different datalogger in geotechnical field.<br>OMNIAlog is a versatile, cost effective and low powered datalogger supporting vibrating wire and all major ...
Filed under: Monitoring -  Datalogger
<p>Wire deformometers allows to monitor the changes in the distance between two anchor points.<br>Typical applications include measurements of small cracks, convergence monitoring in tunnel and structural deformations.<br>The USB wire deformometer consist ...
<p>Archimede datalogger is a readout of CDL family, mainly aimed for measuring systems like inclinometer systems or T-REX incremental extensometer system.<br>Its core is the double 24bit A/D converters and the advanced electronic board designed by Sisgeo. ...
Filed under: Monitoring -  Datalogger
<p>BoreHole profile in-place inclinometers offer continuous remote monitoring of casings deformed by active soil movements. <br><br>BH profile chain consists of a number of MEMS IPI probes with carbon fiber extension rods and a terminal wheel assembly to close ...
<p>Topographic monitoring requires accessories such as bolts, prisms, and targets. Reference bolts are threaded to accept optical targets. Rotary targets can be also mounted on a simple threaded bar or attached to an inexpensive &ldquo;L&rdquo; shaped bracket. ...
<p>Magnet extensometer is a system – based on British Building Research technique – for measuring either settlement or heave at various depths in soil, embankments, earthfill dams and dikes.<br><br>The system consists of access tube with external corrugate ...
<p>Casagrande filter unit is used to measure the water pressure in permeable soil. Filter unit is made in syntherised high density polyethylene. It is available in different models to suite all the customer applications. Filter units have threaded cap joint ...
<p>Convergence Extensometers allow to monitor the changes in the distance between two anchor points.<br>Typical applications include convergence monitoring in tunnels, caverns, underground mining and structural health monitoring. <br>The convergence Extensometer ...
<p>Electrical and vibrating wire crackmeters (jointmeters) are intended to monitor movement across surface cracks and joints in concrete structures or rock.<br>The instrument assembly includes sensor housing and target, both parts are equipped with screw anchors. ...
<p>D-TILTMETERS are designed for applications that require high accuracy and low thermal drift. Their small dimensions perfetc fit the installation on hystorical structures, churchs, mosques, etc...<br>The latest MEMS technology and the Sisgeo's designed electronic ...
Filed under: Monitoring