Your single point of reference for all your Geotechnical Inquiries

[Earth Pressure Cell] Equipment

Total Items found:
Digital Hydrostatic Profile Gauge
<p>The Digital Hydrostatic Profile Gauge is used to monitor the profile of settlement or heave and is predominately used for monitoring beneath embankments or structures where access to the surface is not possible. The system comprises a probe assembly, attached ...
Earth Pressure - Model 4800
<p>The Model 4800 Earth Pressure Cells are designed to measure total pressure in earth fills and embankments. All cells consist of two circular stainless steel plates welded together around their periphery and spaced apart by a narrow cavity filled with de-aired ...
Earth pressure cells L141 & L143
<p>Earth pressure cells (or total pressure cells) are used to monitor total pressure in earthfill dams and embankments or placed at the interface between the structure and the wall of excavation.<br><br>Earth pressure cells are constructed from two stainless ...
Hydraulic pressure cells L111, PK45H, P252A, TUNY
<p>Hydraulic pressure cells are designed to measure stress in mass concrete or placed at the interface between the structure and the wall of excavation.<br><br>The pressure pad consists of two steel plates welded together around their periphery and spaced ...
Jackout Pressure-Model 4820
<p>The Model 4820 Jackout Pressure Cells are used to measure earth pressures on slurry walls. They are designed to fit inside a plate which is pressed against the side of a slurry wall excavation using a hydraulic jack arrangement. This method of installation ...
Push-in Pressure Cell
<p>A Push-in Pressure Cell, also called Spade Cell, is designed to be pushed into the ground where it can measure total earth pressure and pore water pressure within the soil. It can be used as a site investigation tool to determine the in-situ stress state, ...
Push-In Pressure-Model 4830
<p>The Model 4830 Push-In Pressure Cell is designed to be pushed in place for the measurement of total pressures in soils and earth fills. Where effective stress is required, the cell is fitted with an integral piezometer. A thread is provided on the end of ...
Total Earth Pressure Cell
<p>Total Earth Pressure Cells are designed to measure stress acting on plane surfaces. The TP-101 series Total Earth Pressure Cells are constructed from two circular stainless steel plates, welded together around their periphery. The annular space between ...
TPC Total Pressure Cell
<p>The TPC cells consist of a sealed distribution pad, composed of two plates welded together around the periphery and filled with de-aired oil. The pad is connected via a length of steel tube to a pressure transducer. Variation in oil pressure resulting from ...
Vibrating Wire Pressure Cell
<p>The Vibrating Wire Pressure Cell is used to measure total pressure, particularly in earth or rockfill structures. The cells are normally used to validate design assumptions and to give adequate warning of soil pressures in excess of those which a structure ...