Your single point of reference for all your Geotechnical Inquiries

Publications in [Manual] format

Total Items found:
 
<p>The purpose of this Manual is to:<br />1. guide the assessment of the consequence category of all structures constructed as part of<br />activities that require an EA or development approval<br />2. guide the determination of the structures that require ...
Reference: ESR/2016/1933 • Version 5.00 • Effective: 29 MAR 16
 
<p>This Engineer Manual (EM) provides guidance and background for the appropriate screening and selection of in situ thermal remediation (ISTR) technologies, including steam enhanced extraction injection, electrical resistivity heating, and thermal conductive ...
Reference: Manual No. 200-1-21, 30 May 14
 
<p>The sixth edition of the &ldquo;Manual for Erosion and Sediment Control in Georgia&rdquo; has been revised with a focus on performance standards. Implementation of newly researched practices has been incorporated to expand on the traditional erosion and ...
Filed under: Geology -  General Geology
Reference: Georgia Soil and Water Conservation Commission, 2014
 
<p>The original design of a dam may be reevaluated for a number of reasons, including the occurence of an incident or unusual load, the availability of new information, the refinement of certain design requirements or guidelines, the adoption of risk-based ...
Reference: FEMA P-1015/May 2014
 
<p>The Designer shall consult with the Regional Geotechnical Engineer (RGE) as early as possible in the design phase to ensure adequate subsurface explorations are progressed to verify the feasibility of installing the soil nail wall system. Subsurface explorations ...
Reference: GEOTECHNICAL ENGINEERING MANUAL GEM-21 Revision #3
 
<p>The purpose of this chapter is to identify, either by reference or explicitly herein, appropriate methods of soil and rock property assessment, and how to use that soil and rock property data to establish the final soil and rock parameters to be used for ...
Reference: NYSDOT Geotechnical Page 6-1 June 17, 2013 Design Manual
 
<p>The purpose of this manual is to provide the inspector and Engineer-In-Charge with a quick and easy-to-use set of inspection guidelines for the various aspects of tieback construction, including pre-installation inspection, installation, testing and trouble ...
Reference: GEOTECHNICAL ENGINEERING MANUAL GEM-17 Revision #3
 
<p>This manual presents the requirements for geotechnical work for development projects within the County of Los Angeles (County). Many civil engineering projects require geotechnical investigations with input from both an engineering geologist licensed in ...
Reference: Manual for Preparation of Geotechnical Reports July 2013
 
<p>This chapter addresses the design and construction of bridge approach embankments, earth embankments, and lightweight fills. Static loading as well as seismic loading conditions are covered, though for a more detailed assessment of seismic loading on embankment ...
Filed under: Soil Mechanics -  Earthworks
Reference: NYSDOT Geotechnical DRAFT Page 12-5 of 12-118 DRAFT October 1, 2012
 
The purpose of this manual is to provide Geotechnical Engineers guidance to expected procedures when performing geotechnical investigations, analysis, and reporting for the Nebraska Department of Roads (NDOR). This manual is intended to provide general guidelines ...
Filed under: Soil Mechanics -  Earthworks
Reference: NDOR, GEOTECHNICAL POLICIES AND PROCEDURES MANUAL, 2012