Stress-strain curves for brittle rocks show three characteristic stress levels: crack initiation, long-term strength, and peak strength. Damage-controlled testing at low confining stresses has shown that the long-term and peak strengths are sensitive to the amount of induced damage, i.e., the greater the amount of damage, the lower the long-term and peak strengths. These tests also showed that the brittle-failure process is characterized by a loss of cohesion as friction is mobilized. Excavation of a circular test tunnel in massive brittle rock resulted in failure around the tunnel. The back-calculated strength for the failed rock around the tunnel is approximately one-half of that measured in laboratory tests.