Your single point of reference for all your Geotechnical Inquiries

Equipment

Total Items found:
Constant Rate of Strain Cell (CRS)
The GDS Constant Rate of Strain Cell (CRS) is a load frame based one dimensional consolidation cell capable of applying back pressure and measuring pore pressures up to 1MPa (low pressure version) or 20MPa (high pressure version). Coupled with GDS controllers ...
HUMBOLDT ConMatic IPC Automated Consolidation System
<p>ConMatic IPC, Automated Consolidation System. The ConMatic IPC is a fully-automated, incremental pressure controller for performing incremental consolidation and one-dimensional swell tests. The ConMatic IPC allows consolidation and constant load and volume ...
HUMBOLDT Soil Volume Change Meter
<p>Use to evaluate potentially dangerous swelling/shrinking conditions found in clay soils in commercial/residential development sites. PVC (potential volume change) refers to maximum possible volume change a soil could undergo when submitted to changing moisture ...
Hydrocon hydraulic consolidation cell
The Hydrocon hydraulic consolidation cell is the basic part of the apparatus used for the determination of the magnitude and rates of consolidation of soil specimens of relatively low permeability using hydraulically loaded apparatus. This procedure overcomes ...
Hydrocon SWCC hydraulic consolidation cell for unsatureted samples
The Hydrocon SWCC consolidation cell is the basic part of the apparatus for the determination of the magnitude and rates of consolidation of unsaturated soil. Because of the low permeability of some materials, to perform a drying and wetting stage can take ...
Incremental Consolidation Load Frame / Test System
<p>LoadTrac II system for incremental consolidation and swell testing fully automates an entire consolidation test. Constant load and constant volume swell tests can be run automatically. Once a sample is placed in the load frame, the test conditions programmed, ...
LoadTrac II/FlowTrac-II
<p>The LoadTrac-II/FlowTrac-II system fully automates the performance of a Controlled Strain Loading Consolidation test. Once a soil sample is in place, and the test conditions selected, the LoadTrac-II/FlowTrac-II system will run the entire CRSC test from ...
Oedometers, front loading
This test determines the rate and magnitude of consolidation of a soil specimen restrained laterally and subjected to a number of successive increments of vertical loads. The oedometer consists of a rigid aluminium alloy frame to avoid any distortion under ...
Swell Testing Apparatus - (STA-01)
Remoulded compacted soil, when soaked in water, absorbs water and swells. Swell test apparatus is designed to determine the swelling pressure developed by soil specimens moulded to desired densities at known moisture content