Your single point of reference for all your Geotechnical Inquiries

Equipment by [CONTROLS Group]

"CONTROLS is the global leader in the production of Testing Equipment for the construction industry with more than 4.000 products in three business areas. With an Head Office in Milan, five Branches and more than 100 dealers and distributors around the world we are close to our client offering local service and expertise". Source: http://www.controls-group.com/eng/controls-group.php

Total Items found:
The test provides a measure of the resistance of aggregate to surface wear by abrasion. The machine, formerly named “Dorry abrasion machine”, consists of a circular cast iron grinding lap 600 mm dia. which rotates in a horizontal plane at a speed of 28/30 ...
This machine has been developed for determining the resistance to abrasion/wear of natural stones and concrete products. Easy to use, electronic control of the disc speed with auto shut-off of the machine at the selected number of revolutions. Complete with ...
The Polished Stone Value (PSV) of a material used as road surfacing is a measure of how rapidly it becomes polished under the action of vehicle tires. This machine is used to produce accelerate polishing, conforming to Standards, of stone chippings set onto ...
This test determines the rate and magnitude of consolidation of a soil specimen restrained laterally and subjected to a number of successive increments of vertical loads. In this automatic model, the incremental loading, in the load (stress) or swelling (strain) ...
Servo-hydraulic system for static and low frequency dynamic tests on building materials under control of Load/Stress, Displacement Strain.Ideal both for traditional tests, such as compression and flexure on concrete, cement, mortar, blocks etc. and cyclic ...
This method covers the determination of susceptibility to chloride and carbonation penetration into the concrete.
The EN and ASTM standards describe two methods for the determination of air content of compacted fresh concrete which is a very important parameter for the behavior of concrete to weathering and to verify the air content variation due to the use of chemical ...
50-C12Z00, 50-C22Z00 and 50-C32Z00, 1500 to 3000 kN cap., frames consist of a rigid welded steel structure, with spherical seat and platens 165 mm dia., suitable for testing cylinders from dia. 4”x8” to 6”x8” as prescribed by ASTM C39 standard. The vertical ...
This microprocessor based advanced model, is a stand-alone machine, driven by a high-resolution stepper motor with epicyclical reduction gear with reduced backlash. Incorporate a pneumatic closed loop system for the automatic application of the axial pressure ...
Controls Rock Mechanics automatic test systems are designed to test various materials: from soft sandstone to high strength basaltic samples