Your single point of reference for all your Geotechnical Inquiries

Equipment by [Humboldt Mfg. Co.]

"Construction Materials Testing Equipment". Source: http://www.humboldtmfg.com/

Total Items found:
Atterberg Limits Soil Testing, ASTM D4318
<p>Atterberg limits is a basic measure of the critical water content of fine-grained soils. These tests include shrinkage limit, plastic limit, and liquid limit, which are outlined in ASTM D4943.</p>
Automatic Mechanical Compactor
<p>The Mechanical Compactor automatically compacts and rotates mold after each blow while keeping track of the number of hammer blows and shutting off once a preset number of blows is reached. The start/stop function of the compactor is independent of the ...
CBR Field Test Set
<p>The CBR field test set is designed for making CBR determinations in the field and is built around a modified H-4156 Load Frame. CBR field testing can quickly yield a realtive strength determination without having to rely on lab tests. Field tests involve ...
CBR Mechanical Loading Press (H-4156)
<p>The H-4156 loading press (load frame) uses a two-position mechanical jack to provide steady test speeds, as well as rapid travel of the platen for positioning of the sample. The press, includes a H-4454.100, 11,000lbf (48.8kN) calibrated loadring, a H-4178, ...
CBR/LBR Specific Load Frame (H-4156MA)
<p>The H-4156MA load frame has been designed as a low-cost solution to doing CBR testing. It features one-speed operation with a preset speed specifically for CBR tests. The CBR speed is set at 0.050 inches/minute (1.27 mm/minute), ASTM D1883. Maximum piston ...
COE Cone Penetrometer w/ T-Handle (H-4120HA)
<p>Designed to evaluate soil trafficability and manufactured to Corps of Engineers specifications. The factory calibrated dial indicator reads directly in psi. Includes 30 degree cone with 1/2 sq. in. base area; 150 Ib capacity proving ring; a dial indicator ...
Con-Matic Pneumatic Consolidation Machines
<p>Compact and easy-to-use, these pneumatic consolidation load frames are used to estimate the rate and amount of settlement anticipated for a proposed structure. The unit applies loads instantly without impact for stress-controlled consolidation testing; ...
Corps of Engineers Cone Penetrometer (H-4120H)
<p>Designed to evaluate soil trafficability and manufactured to Corps of Engineers specifications. The factory calibrated dial indicator reads directly in psi. Includes 30 degree cone with 1/2 sq. in. base area; 150 Ib capacity proving ring; a dial indicator ...
DCP Test Set with Sleeved Drive Hammer (H-4202AS)
<p>The 4202 DCP Test Set with a H-4202.1 A Sleeved Drive Hammer in place of the standard drive hammer. Provides an easier and safer-to-use hammer. The Dynamic Cone Penetrometer (DCP), originally developed by George Sowers, uses a 15 lb steel mass falling 20 ...
DCP Test Set with Sleeved Drive Hammer without Auger Set (H-4202SX)
<p>The H-4202SX DCP Test Set without the auger set. The H-4202 set includes; (1) Sleeved Drive Hammer assembly (H-4202.1A), (1) heat-treated 45° cone penetrometer point with a 1 ft. adapter rod (H-4202.3), (4) 2.5 ft. E drill rod extensions (H-4202.225). The ...