Your single point of reference for all your Geotechnical Inquiries

Equipment by [GEOKON]

"Over the years, Geokon, Inc. has emerged as The World Leader in Vibrating Wire Technology™ due to our quality, responsive customer service and industry-leading designs. In particular, Geokon, Inc., through innovation and experience, has developed a line of vibrating wire sensors unsurpassed anywhere in the world". Source:  http://www.geokon.com/

Total Items found:
High Sensitivity Settlement System-Model 4675
<p>The Model 4675 High Sensitivity Settlement System consists of a series of vessels containing liquid level sensors interconnected by a liquid filled tube. A reference vessel is positioned at a stable bench mark location with additional vessels positioned ...
High Temperature Embedment (VW) - Model 4200HT/4200HT-T
<p>The Model 4200HT and 4200HT-T High Temperature Embedment Strain Gages are similar to the standard Model 4200. However, the Model 4200HT is designed for short-term use at temperatures up to 200°C and the Model 4200HT-T is designed for long-term use at temperatures ...
Inclinometer Casing, Model 6500
<p>The Model 6500 Inclinometer Casing is used in conjunction with all commercially available inclinometer probes to monitor the stability of embankments, slopes, rock cuts, foundations and excavation walls, piles, coffer dams, etc. The casings and couplings ...
Inclinometer Probe - Model 6000 - 6100
<p>The Model 6000 Inclinometer Probe is used in conjunction with inclinometer casing for the measurement of lateral earth movements which might occur in unstable slopes, land slides, dam and roadway embankments, and landfills.<br>The model 6005 Spiral Indicator ...
Instrumented Rockbolts (VW) - Model 4910
<p>The Model 4910 Instrumented Rockbolt comprises a vibrating wire strain gage located inside a short length of standard threaded rockbolt or rebar. This short length is then connected via a coupling to a longer length of the same bolt material. The instrumented ...
Jackout Pressure-Model 4820
<p>The Model 4820 Jackout Pressure Cells are used to measure earth pressures on slurry walls. They are designed to fit inside a plate which is pressed against the side of a slurry wall excavation using a hydraulic jack arrangement. This method of installation ...
Jackout Type (VW) - Model 4820
<p>The Model 4820 Jackout Pressure Cells are used to measure earth pressures on slurry walls. They are designed to fit inside a plate which is pressed against the side of a slurry wall excavation using a hydraulic jack arrangement. This method of installation ...
LAB3 Surge Module - Model 4999-12L/E
<p>The Model 4999-12L/E LAB3 Surge Protection Board is designed to protect Geokon transducers, dataloggers and power supplies from short duration, high voltage surges that may be induced in the transducer or interconnecting cables. Protection is provided by ...
Filed under: Monitoring -  Readouts
Load Cells (Electrical Resistance Strain Gages)-Model 3000
<p>The Model 3000 Load Cell is made from an annulus of high-strength steel or aluminum, with electrical resistance strain gages in a Wheatstone Bridge configuration. The load cell is designed primarily for use on tiebacks and rockbolts, although they may be ...
Load Cells (Vibrating Wire)-Model 4900
<p>The Model 4900 Vibrating Wire Load Cell consists of a cylinder of high-strength steel with 3, 4 or 6 vibrating wire strain gages located around the circumference of the cell. Loads applied to the cell are measured by the vibrating wire strain gages. The ...