Your single point of reference for all your Geotechnical Inquiries

Equipment by [Sisgeo S.r.l]

Total Items found:
Tilli Portable Tiltmeter
<p>TILLI is a portable tiltmeter. It consists of a rugged stainless steel frame with aluminium sensor housing containing the MEMS technology inclinometer.</p><p>The surfaces of the frame are machined to allow an accurate positioning of the tiltmeter during ...
Tilt Beam (TB) sensors
<p>Tilt Beam (TB) sensors can be used both in chain to measure a continuous displacement or in stand alone application to measure the tilt-displacement between two point (ends of the beam).<br>As all Sisgeo's MEMS tilt sensor, they use the latest MEMS technology ...
V-NOTCH and Flow Meters
<p>Water flow monitoring in open channels is widely employed in environmental and geotechnical field. Leakage measurement is one of the most important indicator of the overall performance of earth/rock-fill and concrete dam.<br><br>The leakage rate is a function ...
Vibrating wire and multipoint piezometers
<p>Vibrating wire piezometers are absolute pressure transducers aimed to measure soil pore pressure. Applications include control of over-pressure in silt and clay soils, measurement of permeability and hydraulic gradients in dams and water pressure evaluation ...
Vibrating Wire Deformation Meters
<p>VW deformation meters (also named LBSG - Long Base Strain Gauges) are mainly designed to be enbedded into concrete or RCC dams in order to measure expansion of induced joints.<br>Deformation meter consists of a vibrating wire displacement transducer housed ...
Vibrating Wire piezometers
<p>Vibrating wire piezometers are used to monitor pore-water pressure in soils. They are typically sealed in boreholes but can also be embedded in fills, or suspended in a well.<br>Typical applications include evaluating slope stability, dewatering and drainage ...
Vibrating Wire Strain Gauges
<p>Vibrating wire strain gages are used to monitor strain in steel or in reinforced concrete and massive concrete structures.<br>Arc-weldable VW strain-gauges are designed for arc welding to steel structure such as tunnel linings, piles and bridges.<br>Embedment ...
Water level meters
<p>Dipmeters are used for water ground level measurements in standpipes, wells and Casagrande piezometers. It is a battery powered portable device equipped with a dipping probe connected to a graduated cable wrapped on a cable reel. In contact with water the ...
Wire Crackmeters
<p>Wire crackmeter allows to monitor the changes in the distance between two anchor points located up to 30 m apart.<br>Typical applications include measurements of large displacement associated with landslides, monitoring of rock-masses, mansonry cracks and ...