TPC-4000 series Total Earth Pressure cells are designed to measure total pressure (effective stress and pore water pressure) in soils and at the interface between structures and the wall of excavation. They are constructed from two stainless steel plates, welded around their periphery with the narrow gap between the plates filled with hydraulic fluid. External pressure on the outside surfaces of the cell squeezes the two plates together creating an internal fluid pressure. A length of stainless steel tube connects the cell to a pressure transducer which converts the fluid pressure into an electrical signal which can be directly readout or transmitted to a data logging system. Models 4010 and 4020 are designed to measure soil pressures on structures. It is fitted with an extra thick back plate on one side which is placed against the structure so as to avoid any warping of the cell. The other side has a thin plate welded to the back plate which provides sensitive measurement of soil pressures.
Range: 70, 170, 350, 700kPa, 1, 2, 3, 5, 7.5, 20 MPa
Over range: 150% FS
Resolution: ± 0.025% FS, Infinite
Accuracy: ± 0.1% FS
Non-linearity: <0.5% FS
Diameter: 120, 230, 300mm
Thickness: 6mm, 12mm
Operating temp: -20°C to +80°C

Geosense Ltd
Nova House
Rougham Industrial Estate
Rougham, Bury St Edumunds
Suffolk IP30 9ND
ENGLAND
T +44 (0)1359 270457
F +44 (0)1359 272860
info@geosense.co.uk