Your single point of reference for all your Geotechnical Inquiries

Equipment tagged with [CBR load frames]

Total Items found:
California Bearing Ratio (CBR) Load Frame / Test System
<p>LoadTrac II loadframe provides compression/extension testing for a number of geotechnical tests that must have accurate control of the rate of displacement during loading. With accessories, the unit can perform CBR, unconfined compression and triaxial shear ...
CALIFORNIA BEARING RATIO - CBR
<p>This method has been developed by the California State Highway Department, and is now accepted by almost all the International Standards in force. The test is aimed to the evaluation of the bearing capacity of soil for flexible pavement design in road construction. ...
California Bearing Ratio Test Field Type - (CBR-01)
To know C. B. R. Values in situ, it is useful in determining the load carrying capacity in the field when in-place density and water contents are such that the degree of sturation is 80 % or greater, when material is conhensionless and coarse grained, such ...
CBR Load Frames
This CBR (California Bearing Ratio) machine has a one-speed motor with a reversing switch that produces a uniform vertical movement of .05"" (1.27mm) per minute, ASTM D1883.
CBR Mechanical Loading Press (H-4156)
<p>The H-4156 loading press (load frame) uses a two-position mechanical jack to provide steady test speeds, as well as rapid travel of the platen for positioning of the sample. The press, includes a H-4454.100, 11,000lbf (48.8kN) calibrated loadring, a H-4178, ...
CBR TESTING MACHINES
<p>Used to load the penetration piston into the soil sample at a constant rate of 1,27 mm/min (1 mm/min to BS Spec.), and to measure the applied loads and piston's penetrations at determined intervals</p>
CBR/LBR Specific Load Frame (H-4156MA)
<p>The H-4156MA load frame has been designed as a low-cost solution to doing CBR testing. It features one-speed operation with a preset speed specifically for CBR tests. The CBR speed is set at 0.050 inches/minute (1.27 mm/minute), ASTM D1883. Maximum piston ...
HUMBOLDT CBR Load Frames
<p>CBR/LBR Specific Load Frame The HM-4156 is a fully automatic, single-speed Load Frame, (0.05 inches/minute), (1.27mm/minute), designed for those who want a high-quality, application-specific Load Frame that provides simple operation with built-in data acquisition ...