Your single point of reference for all your Geotechnical Inquiries

Equipment tagged with [triaxial cells]

Total Items found:
On the contrary, in the unsaturated systems volume change measurements are complicated by the compressibility of air. If an increase of confining pressure is applied to an unsaturated sample, a movement of water out of the sample will occur but at the same ...
GDS produce an extensive range of triaxial cells in order to satisfy the complex range of tests required by today’s modern geotechnical laboratories (see Fig. 1 for a typical triaxial cell schematic). Traditional passive triaxial cells (known as passive due ...
GDS have been working with many leading research and commercial industries around the world using the High pressure triaxial system. Now the high pressure environmental triaxial system (HPETAS) opens up an even bigger range of testing possibilities. The High ...
<p>The HTC triaxial cell consists of a hollow steel cylinder with threaded removable ends. A urethane rubber sleeve incorporating U-shaped seals to form a pressurization chamber for the hydraulic fluid is mounted within the cell. Inside the cell is installed ...
The GDS Large Diameter Cyclic Triaxial Testing System (LDCTTS) is hydraulically actuated with a large diameter triaxial cell suitable for testing samples with large particle sizes such as railway ballast. The system is capable of both monotonic (static) and ...
Designed for applications requiring multi-purpose loading systems, the HM-3000 is ideal for just about any application from road construction to high-volume commercial and educational laboratories. The HM-3000 MasterLoader provides fully-automatic test performance ...
In conventional triaxial testing the determination of axial stiffness is based on external measurements. This method brings errors due to sample bedding effects of the porous stones on either end of the sample and to the loading system and load measuring system. ...
Used for the measurement of cell pressure, back pressure, pore pressure (water or air).
The cell essentially consists of a transparent polycarbonate chamber which has a piston assembly fit to the top and a double flange base fit to the bottom. Three (or six) simple thumbscrew are used to clamp the upper part of the cell to the base, which make ...
The GDS Triaxial Testing System (GDSTTS) is a fully automated advanced triaxial testing system designed principally for stress path testing due to the direct actuation of axial stress through the hydraulically controlled ram in the base of each cell. GDSTTS ...