Your single point of reference for all your Geotechnical Inquiries

Equipment tagged with [transducer]

Total Items found:
This transducer is used for determining the Crack Mouth Opening Displacement (CMOD) conforming to EN 14651. The transducer have to be positioned over the notch sawn previously into the test beam. The specimen has to be loaded by a suitable Flexural frame as, ...
<p>The Model 4450 Displacement Transducer provides remote readout capability for borehole extensometers. They are particularly useful where other types of vibrating wire sensors are used and/or for installations where long cable runs are required. The Model ...
<p>The Model 8020-59 Vibrating Wire (VW) to Analog Converter provides a simple way to connect Geokon&rsquo;s vibrating wire transducers to data acquisition systems, which are not capable of reading frequency signals nor able to generate the proper signals ...
Filed under: Monitoring -  Datalogger
<p>Geokon&rsquo;s 4500HHT Series High Temperature Pressure Transducers are designed for monitoring downhole pressures and temperatures in oil recovery systems and geothermal applications, where the temperature may be as high as 250&deg;C. These sensors are ...
Aluminium and steel structure incorporating a high precision inductive transducer. Three units are generally recommended for axial deformation measurement. They can be easily applied to the specimen by a pair of elastic bands supplied as standard. It has ...
The P-520M frequency counter is the read-out instrument for all GEONOR vibrating-wire transducers. The counter is designed for use in situ and is enclosed in a rigid aluminium housing. The display shows the frequency of vibration in Hz, which has to be calculated ...
<p>The Model 4500H and 4500HH Pressure Transducers are supplied with 1&frasl;4-18 female NPT (4500H) and 7&frasl;16-20 60 degree female medium pressure (4500HH) fittings to permit the transducer to be coupled directly into hydraulic or pneumatic pressure lines. ...
There are several variations of the triaxial test and all are covered by our Clisp Studio csTriax, csUNSAT and csSPATH Software Modules to BS, ASTM and AS standards. Our software is designed for automated triaxial testing to minimize the time that the operator ...
<p>The VWDT-5000 series of vibrating wire displacement transducers cover displacement ranges up to 300 mm and are fully waterproof to a minimum of IP68 (16 bar external pressure). They can be incorporated into many displacement products such as crack joint ...
<p>Wire crackmeter allows to monitor the changes in the distance between two anchor points located up to 30 m apart.<br>Typical applications include measurements of large displacement associated with landslides, monitoring of rock-masses, mansonry cracks and ...