Your single point of reference for all your Geotechnical Inquiries

Equipment tagged with [Pressure Cells]

Total Items found:
Biaxial Stressmeters-Model 4350
<p>The Model 4350 Vibrating Wire Biaxial Stressmeter is designed to measure compressive stress changes in rock, salt, concrete or ice. Three or six Vibrating Wire sensors oriented at 60° intervals allow the principal stress changes to be measured in the plane ...
Borehole Pressure Cell
<p>Borehole Pressure Cells have a long term track record of stress monitoring in both elastic and viscoelastic rock. While typically classified as a soft inclusion, the cell may be filled with mercury to gain stiffness for use as a rigid inclusion in low modulus ...
Borehole Pressure Cells
<p>Borehole Pressure Cells have a long term track record of stress monitoring in both elastic and viscoelastic rock</p>
Borehole Pressure Cells-Model 3200
<p>The standard Borehole Pressure Cell (BPC) is used to measure rock stress changes and is designed to be grouted inside a borehole. The BPC is manufactured from two steel plates welded together around their periphery. The plates are deformed into a “dog bone” ...
Granular Soil Type (Semiconductor, VW) - Model 4815
<p>The Model 4815 Pressure Cell uses two thick plates welded together at a flexible hinge that helps provide a more uniform pressure distribution, which effectively reduces the severity of point loading when used in granular materials. As with the other models ...
NATM Pressure Cell
<p>NPC-3000 Series NATM Pressure cells are designed to monitor radial and tangential stresses of shotcrete in the construction of tunnels, particularly those using the New Austrian Tunnel Method and other underground works. The cells are constructed from two ...
Push-in Pressure Cell
<p>A Push-in Pressure Cell, also called Spade Cell, is designed to be pushed into the ground where it can measure total earth pressure and pore water pressure within the soil. It can be used as a site investigation tool to determine the in-situ stress state, ...
Push-in Type (VW) - Model 4830
<p>The Model 4830 Push-In Pressure Cell is designed to be pushed in place for the measurement of total pressures in soils and earth fills. Where effective stress is required, the cell is fitted with an integral piezometer. A thread is provided on the end of ...
Soft Inclusion Stress Cells-Model 4360
<p>The Model 4360 Vibrating Wire Soft Inclusion Stress Cells (SISC) are larger versions of the Model 4300 Borehole Stressmeters. The SISC is pre-loaded by wedging it into a large size diamond drill hole using an integral screw mechanism or hydraulic piston ...
Standard Type (Semiconductor, VW) - Model 4800
<p>The Model 4800 Earth Pressure Cells are designed to measure total pressure in earth fills and embankments. All cells consist of two circular stainless steel plates welded together around their periphery and spaced apart by a narrow cavity filled with de-aired ...