Your single point of reference for all your Geotechnical Inquiries

Equipment tagged with [Vibrating Wire]

Total Items found:
<p>The OMNIAlog has been designed “in house” by Sisgeo and is the result of over 25 years experience using different datalogger in geotechnical field.<br>OMNIAlog is a versatile, cost effective and low powered datalogger supporting vibrating wire and all major ...
Filed under: Monitoring -  Datalogger
<p>The LC-2&times;16 is similar to the Model 8002-4 (LC-2&times;4), but provides 16 channels of vibrating wire (with thermistor). The LC-2&times;16 is powered by 4 alkaline &lsquo;D&rsquo; cells (or from an external 12V source). The datalogger is housed inside ...
Filed under: Monitoring -  Datalogger
<p>The LC-2&times;4 is a self-contained multi-channel version of the Model 8002-1 (LC-2). The LC-2&times;4 provides 4 channels of vibrating wire (with thermistor) and is powered by two &lsquo;D&rsquo; cells or by solar panel for remote long-term applications. ...
Filed under: Monitoring -  Datalogger
<p>The Model 8600 Series Dataloggers are designed around the Campbell Scientific, Inc. (CSI) Model CR6 Measurement and Control System. Although primarily manufactured for use with vibrating wire sensors and thermistors, the Model 8600 Series can be configured, ...
Filed under: Monitoring -  Datalogger
<p>The Model 4450 Displacement Transducer provides remote readout capability for borehole extensometers. They are particularly useful where other types of vibrating wire sensors are used and/or for installations where long cable runs are required. The Model ...
<p>The DT2040: 20/40 Channel Vibrating Wire/Thermistor Data Logger is a low cost, battery powered data logger, designed for reliable, unattended monitoring of up to 40 sensors which may be any mix of vibrating wire sensors and thermistors, typically 20 vibrating ...
Filed under: Monitoring -  Datalogger
<p>The DT2055B: 5/10 Channel Vibrating Wire/Thermistor Data Logger is a low cost, battery powered data logger, designed for reliable, unattended monitoring of up to 10 sensors which may be any mix of vibrating wire sensors and thermistors, typically 5 vibrating ...
Filed under: Monitoring -  Datalogger
<p>The embedment jointmeter allows to detect the movements between two anchors. It is suitable to be merged in concrete grouting, placing it across expansion joints, as usually occur in concrete dam.<br>A thermistor allows temperature measurement for temperature ...
<p>The Model 8020-59 Vibrating Wire (VW) to Analog Converter provides a simple way to connect Geokon&rsquo;s vibrating wire transducers to data acquisition systems, which are not capable of reading frequency signals nor able to generate the proper signals ...
Filed under: Monitoring -  Datalogger
<p>Multi-point Piezometer Strings allow for multiple Vibrating Wire Piezometers to be connected on a single cable. This facilitates the installation of fully grouted multiple piezometers. The single cable prevents vertical void channels</p>