Your single point of reference for all your Geotechnical Inquiries
Equipment tagged with [vibrating wire sensors]
Total Items found:
<p>The DT2040 40 Channel Data Logger is a low-cost, battery powered data logger, designed for reliable, unattended monitoring of up to 40 sensors which may be any mix of vibrating wire sensors and thermistors, typically 20 vibrating wire sensors with their ...
Filed under:
Monitoring -
Datalogger
<p>The Model 8020-30 Addressable Interface is designed to “daisy-chain” vibrating wire sensors on a single 4-conductor cable, using the Modbus® RTU protocol over an RS-485 connection. It is particularly useful for reducing cable runs in multipoint ...
Filed under:
Monitoring -
Datalogger
<p>Autoresonant Vibrating Wire Sensors expand the possibilities of dynamic monitoring while retaining the inherent long-term stability of Geokon’s line of vibrating wire instruments. Autoresonant sensors are particularly useful where dynamic measurements ...
Filed under:
Monitoring -
Datalogger
<p>The DT2011B Single Channel Vibrating Wire Data Logger is a low cost, battery powered data logger, designed for reliable, unattended monitoring of a single vibrating wire sensor and thermistor.<br> It is a purpose built logger ideal for remote locations ...
Filed under:
Monitoring -
Datalogger
<p>The DT2055B: 5/10 Channel Vibrating Wire/Thermistor Data Logger is a low cost, battery powered data logger, designed for reliable, unattended monitoring of up to 10 sensors which may be any mix of vibrating wire sensors and thermistors, typically 5 vibrating ...
Filed under:
Monitoring -
Datalogger
<p>GeoNet is a low-power, wireless data acquisition network developed to more efficiently collect data from many points. The system consists of a Network Supervisor (8800-2) and up to 100 Single-Channel Sensor Nodes (8800-1). The supervisor controls the network ...
Filed under:
Monitoring -
Datalogger
<p>The DT2011-B is a low cost, battery powered data logger, designed for reliable, unattended monitoring of a single vibrating wire sensor and thermistor.</p>
<p>It is a purpose built logger ideal for remote locations or instruments that require frequent reliable ...
Filed under:
Monitoring -
Datalogger
<p>The Model 8002-1 (LC-2) and Model 8002-1A (LC-2A) are stand-alone, single-channel dataloggers, designed to read both the vibrating wire element and the integral thermistor of any Geokon vibrating wire sensor. The LC-2 offers an internal hard wired transducer ...
Filed under:
Monitoring -
Datalogger
<p>The Wi-SOS 480 (Wireless Sensor Observation System) provides a system to transmit, receive and data log remotely signals from any sensor with a vibrating wire, voltage, 4-20mA, SDI12 or resistance output over long ranges up to 10 km. The user can configure, ...
Filed under:
Monitoring -
Instrument Interfaces
<p>The Wi-SOS 800 (Wireless Sensor Observation System) provides a system to transmit and data log remotely signals from any sensor with a vibrating wire output plus temperature.</p><p>It consists of a series of Wi-SOS 800 nodes (1-16 channels) which have an ...
Filed under:
Monitoring -
Instrument Interfaces