Your single point of reference for all your Geotechnical Inquiries

Equipment

Equipment Types:
Datalogger x 13  data loggers x 10  Data collector x 4  Vibrating wire datalogger x 3  Multi channeled datalogger x 3  SloughReader x 2  Single channel data loggers x 2 
Total Items found:
JET DSP 100 / D
<p>The datalogger JET DSP 100 / D, provides detailed reports showing panels quality, by monitoring excavation depth, X and Y axes inclination, deviation of the axes, rotation Z, date and time.</p>
Filed under: Monitoring -  Datalogger
OMNIAlog Datalogger
<p>The OMNIAlog has been designed “in house” by Sisgeo and is the result of over 25 years experience using different datalogger in geotechnical field.<br>OMNIAlog is a versatile, cost effective and low powered datalogger supporting vibrating wire and all major ...
Filed under: Monitoring -  Datalogger
16-Channel Datalogger (VW) - LC-2 Series · Model 8002-16
<p>The LC-2&times;16 is similar to the Model 8002-4 (LC-2&times;4), but provides 16 channels of vibrating wire (with thermistor). The LC-2&times;16 is powered by 4 alkaline &lsquo;D&rsquo; cells (or from an external 12V source). The datalogger is housed inside ...
Filed under: Monitoring -  Datalogger
4-Channel Datalogger (VW) - LC-2 Series · Model 8002-4
<p>The LC-2&times;4 is a self-contained multi-channel version of the Model 8002-1 (LC-2). The LC-2&times;4 provides 4 channels of vibrating wire (with thermistor) and is powered by two &lsquo;D&rsquo; cells or by solar panel for remote long-term applications. ...
Filed under: Monitoring -  Datalogger
40 Channel Data Logger
<p>The DT2040 40 Channel Data Logger is a low-cost, battery powered data logger, designed for reliable, unattended monitoring of up to 40 sensors which may be any mix of vibrating wire sensors and thermistors, typically 20 vibrating wire sensors with their ...
Filed under: Monitoring -  Datalogger
8600 Series Dataloggers - Model 8600 Series
<p>The Model 8600 Series Dataloggers are designed around the Campbell Scientific, Inc. (CSI) Model CR6 Measurement and Control System. Although primarily manufactured for use with vibrating wire sensors and thermistors, the Model 8600 Series can be configured, ...
Filed under: Monitoring -  Datalogger
Addressable Vibrating Wire Interface - Model 8020-30
<p>The Model 8020-30 Addressable Interface is designed to &ldquo;daisy-chain&rdquo; vibrating wire sensors on a single 4-conductor cable, using the Modbus&reg; RTU protocol over an RS-485 connection. It is particularly useful for reducing cable runs in multipoint ...
Filed under: Monitoring -  Datalogger
Archimede Datalogger
<p>Archimede datalogger is a readout of CDL family, mainly aimed for measuring systems like inclinometer systems or T-REX incremental extensometer system.<br>Its core is the double 24bit A/D converters and the advanced electronic board designed by Sisgeo. ...
Filed under: Monitoring -  Datalogger
Autoresonant Sensors (VW) - Model 4500CPR · 8020 · AR Series
<p>Autoresonant Vibrating Wire Sensors expand the possibilities of dynamic monitoring while retaining the inherent long-term stability of Geokon&rsquo;s line of vibrating wire instruments. Autoresonant sensors are particularly useful where dynamic measurements ...
Filed under: Monitoring -  Datalogger
DT2011B: SINGLE CHANNEL VIBRATING WIRE DATA LOGGER
<p>The DT2011B Single Channel Vibrating Wire Data Logger is a low cost, battery powered data logger, designed for reliable, unattended monitoring of a single vibrating wire sensor and thermistor.<br> It is a purpose built logger ideal for remote locations ...
Filed under: Monitoring -  Datalogger