Your single point of reference for all your Geotechnical Inquiries

[Tiltmeters] Equipment

Total Items found:
<p>The Bassett Convergence System is designed for automated monitoring of tunnel deformation. The system is robust, simple and proven. It is most commonly used in transportation tunnels, but can be adapted to monitor other structures. The itmsoil Bassett Convergence ...
<p>YieldPoint offers both MEMS (SG) and Electrolytic (EL) Tiltmeters in uniaxial, biaxial and triaxial configurations.</p>
<p>D-TILTMETERS are designed for applications that require high accuracy and low thermal drift. Their small dimensions perfetc fit the installation on hystorical structures, churchs, mosques, etc...<br>The latest MEMS technology and the Sisgeo's designed electronic ...
Filed under: Monitoring
<p>Digital Q-Tilt 6000 system consists of the probe “Digital Q-Tilt 6000 (Model-4480)” to measure inclination and handy logger “Handy Logger Digital Q-Tilt (Model-4470)” to read / storage the monitoring data. These instruments are for manual monitoring using ...
<p>The Digital Tilt Logger is a low cost, battery-powered data logger and tilt meter in a single compact unit. It measures tilt in either one or two perpendicular axes in the plane of the base. The unit is intended to be permanently installed to provide long-term ...
Filed under: Monitoring -  Datalogger
<p>The Model 6101D MEMS Digital Tiltmeter is a low-cost, portable device designed to measure tilt in structures such as buildings, dams and embankments and also for measurements related to the stability of slopes, open pits and the walls of excavations (e.g. ...
<p>EL tiltmeters are narrow-angle, high-resolution sensors used to monitor changes in the inclination of a structure. They can provide an accurate history of movement and early warning of potential structural damage. An EL tiltmeter consists of an electrolytic ...
<p>The Electrolevel Beam Sensor measures rotation of structures in the vertical plane. The sensor is based on the well established Fredericks 0711 series electrolevel sensor. The sensor mounting incorporates an adjustment for zeroing and protects the sensor ...
<p>Geosense® MEMS Tilt Beams are designed for attachment to structures, on either a vertical or horizontal surface, for the measurement of tilt or differential settlement.</p><p>They consist of a highly accurate MEMS sensor housed in a fully sealed enclosure ...
<p>In-place MEMS Tilt Meters measure tilt in either one or two axial planes perpendicular to the surface of the base plate</p>