Your single point of reference for all your Geotechnical Inquiries
Publications in [Paper - Conference] format
Total Items found:
<p>Recent additions to the Brantford General Hospital expansion included construction of a new hospital wing, involving excavations of up to 11 metres (36 feet) depth, in loose to compact sand adjacent to an existing eight-storey hospital structure. The tendered ...
Filed under:
Soil Mechanics -
Earth Retaining Structures
Reference:
(2004) - Fifth International Conference on Case Histories in Geotechnical Engineering
<p>This paper discusses some aspects of the seismic behaviour of large homogeneous earth dams. Numerical analyses were carried out using a plane-strain finite difference model of an existing dam that has been calibrated using the monitoring data taken during ...
Filed under:
Dam Engineering -
Dam Seismic Design
Reference:
Proceedings of the 19th International Conference on Soil Mechanics and Geotechnical Engineering, Seoul 2017
Wang J.
,
Zheng H. B.
et al.
<p>Recent years have witnessed a growing investigation of terrestrial laser scanning (TLS) for monitoring the deformation of tunnels. TLS provides the ability to obtain a more accurate and complete description of the tunnel surfaces, allowing the determination ...
Filed under:
Tunnel Engineering -
Tunnel Monitoring
Reference:
The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Volume XLII-2/W7, 2017, ISPRS Geospatial Week 2017, 18–22 September 2017, Wuhan, China
<p>In recent years, due to city development, excavation and building construction in the loose fill of the southside of Tabriz, Iran is inevitable. This paper presents a case study of stabilization of a 16m deep excavation in loose fill using soil nail wall ...
Filed under:
Soil Mechanics -
Earth Retaining Structures
Reference:
Proceedings of the 2nd World Congress on Civil, Structural, and Environmental Engineering (CSEE’17) Barcelona, Spain –April 2 –4, 2017
Danišovič P.
,
Šrámek J.
et al.
<p>Within the project entitled “Models of formation and spread of fire to increase safety of road tunnels”, it was necessary to devise a method how to record airflow velocity during the fire in situ tests in road tunnels. Project is in first year ...
Filed under:
Tunnel Engineering -
Tunnel Design
Reference:
MATEC Web of Conferences 117, 00035 (2017)
<p>Although numerous studies have been conducted, a recommended practice for incorporation of earthquake loading into the geotechnical design considerations for subsea structures such as wells, manifolds, and PLETs, and pipelines is not consistent. Industry ...
Filed under:
Earthquake Engineering -
Seismic Mitigation and Design
Reference:
This paper was prepared for presentation at the Offshore Technology Conference held in Houston, Texas, USA, 2–5 May 2016
<p>We propose a new simplified method for assessing the seismic performance of homogeneous small earth dams (height≤20 m) founded on bedrock. Dynamic decoupled calculations were performed on seven accelerograms applied to 33 structural and geotechnical ...
Filed under:
Dam Engineering -
Dam Seismic Design
Reference:
International Symposium Qualification of Dynamic Analyses of Dams and their Equipment and of Probabilistic Assessment of Seismic Hazard in Europe, Saint Malo, FRA, 31/08-2/09/16
Boylan N. P.
,
Bihs A.
et al.
<p>The piezoball, or ball penetrometer with pore pressure measurement, was developed for assessing the geotechnical properties of soft soils, particularly soft seabed sediments where the traditional cone penetrometer can have limitations. The measurement of ...
Filed under:
Soil Mechanics -
Soil Behavior & Testing
Reference:
Geotechnical and Geophysical Site Characterisation 5 – Lehane, Acosta-Martínez & Kelly (Eds) © 2016 Australian Geomechanics Society, Sydney, Australia, ISBN 978-0-9946261-2-7
Brown I.R.
,
Wood P.J.
et al.
<p>Using a software package that can be used for either three or two-dimensional (2D) slope stability analyses of the same model we analyse the stability of columns (3D) or slices (2D) overlying a shear failure surface. The failure surface can be any shape, ...
Filed under:
Mining Engineering -
Mine Slope Stability
Reference:
APSSIM 2016, Brisbane, Australia
Gravit M.
,
Antonov S.
et al.
<p>Presents the results of studies of innovative materials in the field of experimental and theoretical research fire resistance fireproof panels Pyro-Safe Aestuver T. Owing to the assembly simplicity, materials cheapness, high ecological standard, recycling, ...
Filed under:
Tunnel Engineering -
Materials for Tunnels
Reference:
MATEC Web of Conferences 7 , 04007 (2016)