Your single point of reference for all your Geotechnical Inquiries

Publications tagged with [static]

Total Items found:
TEST PILE PROGRAM TO DETERMINE AXIAL CAPACITY AND PILE SETUP FOR THE BILOXI BAY BRIDGE (2009)
The results of the test pile program established driving criteria for production piles that included end of- drive blow counts and pile tip elevations with an appropriate allowance for setup. The program also confirmed that the planned installation equipment ...
Reference: DFI Journal Volume 3, No. 1, May 2009, Deep Foundations Institute, pp13-22.
EFFECTIVE STRESS ANALYSIS AND SET-UP FOR SHAFT CAPACITY OF PILES IN CLAY (2008)
A case history of repeated dynamic and static loading tests in Alberta on two pipe piles during dissipation of driving-induced pore pressures is presented together with three reanalyzed published case histories involving similar records.
Reference: "From research to practice in geotechnical Engineering", The Geo-Institute of the American Society of Civil Engineers, Edited by J.E. Lair, D.K., Crapps, and M.H. Hussein. ASCE Geotechnical Special Publication, GSP 180"
A COMPARISON OF STATIC AND DYNAMIC PILE TEST RESULTS (1992)
Static and dynamic tests compared with CAPWAP analysis of restrike data and analysis of static data investigation set up time, toe resistance mobilization and settlement.
Reference: Fourth International Conference on the Application of Stress-Wave Theory to Piles, Ed. F.B.J. Barends, DenHague, September 21-24, 1992.
VARIATION OF CAPACITY WITHIN A PILE GROUP (1988)
When evaluating the performance of a piling project, the approach is acceptable. However, when performing a special study, for instance comparing different methods of capacity evaluation, such as static versus dynamic, it is not advisable to apply one method ...
Reference: "Proceedings of the Third International Conference on the Application of Stress-Wave Theory to Piles, 1988"