Your single point of reference for all your Geotechnical Inquiries

Equipment

Total Items found:
Pin Hole Dispersion Apparatus
<p>This test is used for evaluating clay soils for erodibility by flowing water through a small hole that is drilled through the compacted specimen. The test chamber has a unique clamping ring for holding the stainless steel mold to the base while compacting ...
Pinhole test apparatus
Certain fine-grained soils with high sodium content are highly erodible by the water flowing through them. During the test the flow of water under a high hydraulic gradient through a cavity in the soil is reproduced. The test apparatus consists of a cylindrical ...
Plastic limit set
Used for determining the lowest moisture content of a soil at which the sample can be rolled into little rolls, 3 mm dia., without breakages
Plastic Limit Set - (PLS-01)
Moisture contents at which soil has smallest plasticity is called limit. For determination purpose plastic limit is defined as the water content at which a soil will just begin to crumble when rolled into a thread of 3mm. Dia
Plate Bearing Test Equipment
The Plate Bearing Test is used to determine the bearing capacity of a soil under field loading conditions for a specific loading plate and depth of embedment. It is also used for load tests of soil and flexible pavement components. The Basic test set unit ...
Pressure transucers for triaxial test
Used for the measurement of cell pressure, back pressure, pore pressure (water or air).
Proctor moulds and rammers
Used for determining the relationship between the moisture content and and density of compacted soil. The moulds include collar, mould body and base plate. The rammers are provided with guide sleeve with vent holes. All made of plated stee
Proctor Penetrometer Set (H-4139)
<p>Establishes the moisture-penetration resistance relations of fine-grained soils. Includes these interchangeable needles (area in sq. in. or sq. cm): 1 (6.45), 3/4 (4.84), 1/2 (3.22), 1/3 (2.15), 1/5 (1.29), 1/10 (.65), 1/20 (0.32) 1/30 (0.22cm2) and 1/40 ...
Relative density of cohesionless soils
This method, in the EN standard, covers the determination of the maximum dry density and water content of cohesionless materials when compacted using a vibrating table. Materials for which yhis method is applicable may contain up to 12% by mass fines (<0.063 ...
Relative Density of Cohesionless Soils Apparatus
Apparatus determines the relative density of cohesionless, free-draining soils and provides well-defined results on soils that do not respond well to conventional moisture-density impact compaction testing. Soils for which this method is appropriate may contain ...