Your single point of reference for all your Geotechnical Inquiries

Equipment

Total Items found:
CBR/LBR Specific Load Frame (H-4156MA)
<p>The H-4156MA load frame has been designed as a low-cost solution to doing CBR testing. It features one-speed operation with a preset speed specifically for CBR tests. The CBR speed is set at 0.050 inches/minute (1.27 mm/minute), ASTM D1883. Maximum piston ...
Classification Testing
VJ Tech has a wide range of Classification Testing Equipment and accessories, including hand and motor operated casagrande equipment, sieves, sieve shakers, ovens, cone penetrometer equipment and a portable plastic limit test set.
COE Cone Penetrometer w/ T-Handle (H-4120HA)
<p>Designed to evaluate soil trafficability and manufactured to Corps of Engineers specifications. The factory calibrated dial indicator reads directly in psi. Includes 30 degree cone with 1/2 sq. in. base area; 150 Ib capacity proving ring; a dial indicator ...
Compaction
We supply Manual Compaction Rammers for soil compaction to BS (2.5kg, 50mm diameter, 300mm drop and 4.5 kg, 50mm diameter, 450mm drop) and ASTM (5.5lb, 2" diameter, 12" drop and 10lb, 22 diameter, 18" drop) Standards.
Compaction Molds
Different sizes of compaction mold equipment starting from 2.8" to 6" inside diameter.
Compaction permeameters
This apparatus is used to control the water supply in the constant or falling head permeability tests on compacted soils. The permeameters comprise valve, water inlet or outlet, mould and collar, filter baseplate. The stand consists of an aluminium panel complete ...
COMPACTION PERMEAMETERS
<p>Used for determining permeability to water of soil gravel, clay, sand samples. Supplied complete with clamped upper and lower plate giving the possibility to perform permeability tests also on compacted samples, water inlet with valve, water outlet, two ...
COMPUTERIZED LOAD TEST FRAME: CBR
<p>The frame is the same as for the previous load frames (mod. S211 KIT to S213), but the load is measured by an electric 50kN cell with high precision strain transducers. The deformation (flow) is measured by a displacement transducer 50 mm stroke and +/- ...
Con-Matic Pneumatic Consolidation Machines
<p>Compact and easy-to-use, these pneumatic consolidation load frames are used to estimate the rate and amount of settlement anticipated for a proposed structure. The unit applies loads instantly without impact for stress-controlled consolidation testing; ...
CONE PENETROMETER
<p>The test is based on the relationship between the moisture content at which clay soils pass from a plastic to a liquid state. This value is obtained from the penetration capacity of the standard cone allowed to free fall into the sample for a period of ...