Your single point of reference for all your Geotechnical Inquiries
Equipment
Total Items found:
<p>Permeability Cell. HM-4188B permeability cells are constructed of high-quality materials throughout for long-lasting performance. The cell top and base are precision machined from 6061 T6 aluminum and then hard-coated and PTFE-impregnated for a durable ...
Filed under:
Laboratory Testing -
Soil Testing
<p>For use by field personnel to check visual classification of soils. Verifies whether excavation side walls require shoring, based on OSHA cohesive soils classifications. Indicates consistency, shear strength, and approximate unconfined shear strength. Direct-reading ...
Filed under:
Laboratory Testing -
Soil Testing
<p>Use to evaluate potentially dangerous swelling/shrinking conditions found in clay soils in commercial/residential development sites. PVC (potential volume change) refers to maximum possible volume change a soil could undergo when submitted to changing moisture ...
Filed under:
Laboratory Testing -
Soil Testing
The Hydrocon hydraulic consolidation cell is the basic part of the apparatus used for the determination of the magnitude and rates of consolidation of soil specimens of relatively low permeability using hydraulically loaded apparatus. This procedure overcomes ...
Filed under:
Laboratory Testing -
Soil Testing
The Hydrocon SWCC consolidation cell is the basic part of the apparatus for the determination of the magnitude and rates of consolidation of unsaturated soil. Because of the low permeability of some materials, to perform a drying and wetting stage can take ...
Filed under:
Laboratory Testing -
Soil Testing
Filed under:
Laboratory Testing -
Soil Testing
The in-situ California Bearing Ratio is used for the evaluation of the bearing capacity of soil from a vehicle on site immediately and with less delay. Rigid and stable frame, made from corrosion proof steel.
Filed under:
Laboratory Testing -
Soil Testing
<p>LoadTrac II system for incremental consolidation and swell testing fully automates an entire consolidation test. Constant load and constant volume swell tests can be run automatically. Once a sample is placed in the load frame, the test conditions programmed, ...
Filed under:
Laboratory Testing -
Soil Testing
For determining the liquid limit of soils. This is specially useful to obtain reliable and accurate results for those soils which have low plasitcity index. The percentage moisture contents determined when cone with half angle of 15-30 minutes under a total ...
Filed under:
Laboratory Testing -
Soil Testing
The laboratory vane apparatus is based on a original concept of the Transport and Road Research Laboratory of the United Kingdom. It can be provided with a wide range of vane sizes, although as standard, it is sold with the 12.7 mm square vane and a set of ...
Filed under:
Laboratory Testing -
Soil Testing