Your single point of reference for all your Geotechnical Inquiries

Equipment by [GEOKON]

"Over the years, Geokon, Inc. has emerged as The World Leader in Vibrating Wire Technology™ due to our quality, responsive customer service and industry-leading designs. In particular, Geokon, Inc., through innovation and experience, has developed a line of vibrating wire sensors unsurpassed anywhere in the world". Source:  http://www.geokon.com/

Total Items found:
Multiple Point, Rod, Flexible-Model 1280 (A-6)
<p>The Model A-6 Flexible Rod Extensometer uses continuous lengths of fiberglass rods (inside protective tubing), cut to customer-specified lengths, coiled at the factory and shipped ready for installation. The extensometer is lightweight, making it easier ...
Multiple Point, Rod, Groutable-Model 1150 (A-3)
<p>The Model A-3 Multiple Point Rod Extensometer is the preferred design for installation in downward directed boreholes which are easily filled with cement grout. Up to eight anchors can be installed, at various depths, in a 76 mm diameter borehole providing ...
Multiple Point, Rod, Hydraulic-Model 1250 (A-5)
<p>The Model A-5 Multiple Point Rod Extensometer with Hydraulic Anchors is recommended for use in soft ground and soils or in rock where the borehole may deteriorate. This anchor is very versatile and can be used in boreholes of varying diameter and roughness ...
Multiple Point, Rod, Snap-Ring-Model 1200 (A-4)
<p>The Model A-4 Multiple Point Rod Extensometer with Snap-Ring Anchors is quickly and easily installed in boreholes in hard or competent rock. Anchors are pushed to the required depth on the end of setting rods and then a cord is pulled to remove the locking ...
Multiplexer (MUX) - Model 8032
<p>The Model 8032 Multiplexer expands the number of channels that can be read by the Model 8600-1/2 Dataloggers, Micro-1000 Datalogger or the Model GK-404 or GK-405 Vibrating Wire Readouts. The channels are protected against voltage surges with tripolar plasma ...
Filed under: Monitoring -  Datalogger
Multipoint Settlement Systems-Model 3655, 4655
<p>The Model 3655 and 4655 are Multipoint Settlement Systems comprising of a series of sensitive Semiconductor Pressure Transducers (3655) or Vibrating Wire Pressure Transducers (4655) connected together with a special Nylon tube filled with de-aired water ...
NATM Style Shotcrete Stress (VW) - Model 4850
<p>The Model 4850 NATM Style Shotcrete Stress Cells are designed for the measurement of tangential (4850-1) and radial (4850-2) stresses in shotcrete tunnel linings. The cells consist of two rectangular steel plates welded together around the periphery with ...
NATM Style Shotcrete Stress-Model 4850
<p>The Model 4850 NATM Style Shotcrete Stress Cells are designed for the measurement of tangential (4850-1) and radial (4850-2) stresses in shotcrete tunnel linings. The cells consist of two rectangular steel plates welded together around the periphery with ...
Pile Tip Pressure Cell-Model 4855
<p>The Model 4855 Pile Tip Pressure Cell is used to measure pile-tip loads in cast-in-place concrete piles (caissons). Like the Model 4810, the Pile Tip Pressure Cell has a thick upper plate. The cell is manufactured to be close to the diameter of the pile ...
Push-In Pressure-Model 4830
<p>The Model 4830 Push-In Pressure Cell is designed to be pushed in place for the measurement of total pressures in soils and earth fills. Where effective stress is required, the cell is fitted with an integral piezometer. A thread is provided on the end of ...