Your single point of reference for all your Geotechnical Inquiries

Equipment by [Sisgeo S.r.l]

Total Items found:
Horizontal In Place Inclinometers
Horizontal IPI gauge consists of a stainless steel and thermoplastic resin assembly with one fixed wheel (close to the joint) and one spring loaded wheel.IPI string is composed by a chain of IPI gauges with carbon fiber extension rods and a terminal ...
Hydraulic pressure cells L111, PK45H, P252A, TUNY
Hydraulic pressure cells are designed to measure stress in mass concrete or placed at the interface between the structure and the wall of excavation.The pressure pad consists of two steel plates welded together around their periphery and spaced ...
Inclinometer casing
Inclinometer casing is a special grooved tube, generally installed into a drillhole, used in conjunction with inclinometer system to determine sub-surface ground or horizontal soil movements. Automatic surveying is possible with MEMS in-place inclinometers, ...
Junction Boxes and Accessories
Sisgeo produce all the accessories needed in order to better complete every kind of monitoring systems.Measuring and switch terminal boxes are useful in case of manual reading to simplify and accelerate the operations.Junction boxes permit to connect ...
MEMS Analogue Tilt Meters
The measurement of inclinations is essential for the control and security of structures in elevation, both during the construction phase than in operation.Thanks to the new MEMS self-compensated sensor or the force-balanced servo-accelerometer sensors, ...
MEMS In-place Inclinometers
In-place inclinometer (IPI) sensors are designed for automatic monitoring of critical locations. Jointed together and suspended inside the casing where deformation may occur, a string of IPI sensors allows to monitor the continuous profile of the inclinometer ...
MEXID Miniaturized MPBX
MEXID extensometers are used to monitor displacements of measuring points deeply positioned in grounds or rocks, with reference to the instrument head.The main strength of MEXID is the small drilling diameter: only 50mm (75mm first meter only).MEXID ...
MEXID Miniaturized Multipoint Extensometer
MEXID extensometers are used to monitor displacements of measuring points deeply positioned in grounds or rocks, with reference to the instrument head.The main strength of MEXID is the small drilling diameter: only 50mm (75mm first meter only).MEXID ...
MPBX Multipoint Borehole Extensometers
Rod extensometers are installed in borehole to monitor displacements at various depths using rods of different material and lengths. A pre-set length of measuring rod is inserted into a nylon tube to avoid soil friction and its tip is fixed to a steel groutable ...
Multipoint Embankment Settlement Gauges
The multipoint settlement systems consist of a number of hydraulic settlement gauge connected by tubing to a reference tank located on higher, stable ground.The settlement gauge is a pressure transducer with vibrating wire or capacitive technology, ...