Your single point of reference for all your Geotechnical Inquiries

Equipment tagged with [Consolidation]

Total Items found:
BUYER'S GUIDE FOR CONSOLIDATION SYSTEMS
<p>This test determines the rate and magnitude of consolidation of a soil specimen restrained laterally and subjected to a number of successive increments of vertical loads. In this automatic model, the incremental loading, in the load (stress) or swelling ...
Consolidation Apparatus
The One-dimensional Consolidation test is used to determine the consolidation characteristics of soils of low permeability. The consolidation is rigidly constructed to ensure minimumframe distortion. The frame is designed to load the specimen through a yoke ...
CONSOLIDATION TEST
<p>The one-dimensional consolidation test of a soil sample enables to ascertain the settlement characteristic over a given period of time. The soil specimen under test is axially loaded and laterally contained. Loads are applied with progressive increases ...
HUMBOLDT Soil Volume Change Meter
<p>Use to evaluate potentially dangerous swelling/shrinking conditions found in clay soils in commercial/residential development sites. PVC (potential volume change) refers to maximum possible volume change a soil could undergo when submitted to changing moisture ...
Large Cyclic Direct Simple Shear (Cyclic DSS) Load Frame / Test System
<p>ShearTrac-III-DSS</p><p>The ShearTrac III-DSS system is a universal shear system capable of performing the consolidation, static and cyclic direct simple shear phases under full automatic control. This system is of the type developed at NGI in the mid 1960's. ...
LoadTrac II/FlowTrac-II
<p>The LoadTrac-II/FlowTrac-II system fully automates the performance of a Controlled Strain Loading Consolidation (CSL) test. Once a soil sample is in place, and the test conditions selected, the LoadTrac-III/FlowTrac-II system will run the entire CRCS test ...
Swell Testing Apparatus - (STA-01)
Remoulded compacted soil, when soaked in water, absorbs water and swells. Swell test apparatus is designed to determine the swelling pressure developed by soil specimens moulded to desired densities at known moisture content
Triaxial Stress Path Load Frame / Test System
<p>LoadTrac II/FlowTrac II<br>The LoadTrac-II/FlowTrac-II System for triaxial (CU, CD, and UU) and stress path testing fully automates the conduct of triaxial stress path tests on soils, and soft rocks. This system operates by software which automates the ...