Your single point of reference for all your Geotechnical Inquiries
Equipment tagged with [aggregates]
Total Items found:
<p>Blue methylene test set CLAY CONTENT IN FINE AGGREGATES. Utilized to determine the clay content in the fine portions of the aggregates</p>
Filed under:
Laboratory Testing -
Soil Testing
<p>Used to determine the loose bulk density and voids of aggregates. Stainless steel made, the 10 and 20 litres models have handles</p>
Filed under:
Laboratory Testing -
Aggregate Testing
Stainless steel construction with handles. The top rim is smooth and plane and parallel to the bottom conforming to the standards.Stainless steel constructionStrictly conforming to EN standards
Filed under:
Laboratory Testing -
Aggregate Testing
Used for determining the amount of surface moisture in fine aggregate. The flask is graduated to 200 ml between the two bulbs and from 375 to 450 ml above the second bulb.
Filed under:
Laboratory Testing -
Aggregate Testing
Advanced controller with cycle programmer for 50 programs and 1000 segmants.Temperature sensor movable inside the cabinet or inside the sample conforming to Standard requirement.High accuracy: ±1°C, ±5%RH (RH with 10-D1429/A model only).A multipurpose climatic ...
Filed under:
Laboratory Testing -
Aggregate Testing
Used for determining the organic impurities in fine aggregates by the colorimetric method together with the Organic impurities test bottles.5 colored glass mounted in plastic holder.
Filed under:
Laboratory Testing -
Aggregate Testing
Used to determine the crushing resistance of lightweight aggregates. Consisting, basically, of a steel cylinder and piston.Two versions available:Procedure 1: apparatus with cylinder int. dia. 113 mmProcedure 2: apparatus with cylinder int. dia. 76 mm
Filed under:
Laboratory Testing -
Aggregate Testing
The aggregate crushing value provides relative measure of the resistance of an aggregate to crushing under a gradually applied compressive load. Two versions available: 150 (standard) and 75 mm dia. The apparatus comprehend cylinder, plunger, base plate, tamping ...
Filed under:
Laboratory Testing -
Aggregate Testing
Used for testing the abrasion resistance of aggregates. The machine consists of a rotating frame to support two steel cylinders complete with covers and locking device. The rotating frame is driven by a motor speed reducer and an automatic counter is included ...
Filed under:
Laboratory Testing -
Aggregate Testing
Used to obtain information about the shape and the angularity of grains of the 0.075-4 mm fraction of aggregates. It consists essentially of a container, which ends in a funnel 12 or 16 mm dia. with 60° opening. Supplied complete with both funnels.
Filed under:
Laboratory Testing -
Aggregate Testing