Your single point of reference for all your Geotechnical Inquiries

Equipment tagged with [In place Inclinometer]

Total Items found:
Geosense In-place Inclinometer Systems
<p>The Geosense® In-Place Inclinometer System (IPI) measures tilt and is used to calculate rotation and/or displacement in a vertical, inclined, or horizontal orientation. It is available in either a Uniaxial or Biaxial version.</p><p>The system consists of ...
Digital MEMS Inclinometer System
<p>Digital MEMS inclinometer probe represents the most advanced evolution of Sisgeo inclinometer system.</p><p>Inclinometer probe, available with 500 mm and 1000 mm gauge length, is manufactured from AISI 316 stainless steel in one-piece in order to guarantee ...
Horizontal In Place Inclinometers
<p>Horizontal IPI gauge consists of a stainless steel and thermoplastic resin assembly with one fixed wheel (close to the joint) and one spring loaded wheel.<br>IPI string is composed by a chain of IPI gauges with carbon fiber extension rods and a terminal ...
In-Place Inclinometer
<p>The In-Place Inclinometer (IPI) is used to measure lateral displacement within a borehole. Most commonly, the IPI is used in a system where multiple IPIs are installed at varying depths. In this manner the profile of the displacement can be monitored. The ...
MEMS Horizontal In-Place Inclinometer - Model 6155
<p>The Model 6155 MEMS In-Place Inclinometer consists of a string of MEMS (Micro-Electro-Mechanical Sensor) tilt sensors mounted on lengths of stainless steel tubing which are linked together by universal joints. A spring-loaded wheel assembly designed to ...
MEMS Tiltsensor
<p>The MEMS Tiltsensor is based on the itmsoil In-Place Inclinometer (IPI) sensor and is designed for attaching to structures where a large tilt range is required. Mounted within the Stainless Steel housing are one or two (uniaxial or biaxial) MEMS sensors ...
Smart In-Place Inclinometer (Smart IPI)
<p>The Smart In-Place Inclinometer (Smart IPI) System is used to remotely monitor lateral displacement within a vertical borehole. The Smart IPI System has been designed to supersede traditional IPI systems; with advanced technology and new mechanical design, ...
Vibrating Wire In-Place Inclinometer - Model 6300
<p>The Model 6300 Vibrating Wire In-Place Inclinometer is used in conjunction with near vertical inclinometer casing for the measurement of lateral displacement similar to the Model 6000 Inclinometer Probe. However, the Model 6300 In-Place system is designed ...
ZCT-CX100 In-place Inclinometer system
<p>ZCT-CX100-S01 tilt sensor is a high-precision sensor developed by Zhichuan Technology. The sensor has a maximum measuring range of ± 15 degrees, supporting MODBUS RTU protocol, suitable for construction and civil engineering safety monitoring system.</p><table ...