Your single point of reference for all your Geotechnical Inquiries

Equipment tagged with [Tiltmeter]

Total Items found:
D-TILTMETER - Digital MEMS Tiltmeters
<p>D-TILTMETERS are designed for applications that require high accuracy and low thermal drift. Their small dimensions perfetc fit the installation on hystorical structures, churchs, mosques, etc...<br>The latest MEMS technology and the Sisgeo's designed electronic ...
Filed under: Monitoring
Electrolevel Beam Sensor
<p>The Electrolevel Beam Sensor measures rotation of structures in the vertical plane. The sensor is based on the well established Fredericks 0711 series electrolevel sensor. The sensor mounting incorporates an adjustment for zeroing and protects the sensor ...
Geosense MEMS Tilt Beam
<p>Geosense® MEMS Tilt Beams are designed for attachment to structures, on either a vertical or horizontal surface, for the measurement of tilt or differential settlement.</p><p>They consist of a highly accurate MEMS sensor housed in a fully sealed enclosure ...
In Place MEMS Tilt Meter
<p>In-place MEMS Tilt Meters measure tilt in either one or two axial planes perpendicular to the surface of the base plate</p>
In-Place Tilt Meter
<p>MEMS In-Place Tilt Meters are designed to measure uniaxial or biaxial tilt, which is measured from the plane(s) perpendicular from the base unit. They are designed to be installed permanently in either the vertical or horizontal position by either bonding ...
IS Liquid Levelling System
<p>For each project sensors need to be selected with the appropriate measuring range to ensure accurate settlement measurements: the elevation differences need to be within the range, even after the expected settlements. During installation the sensors are ...
MEMS Analogue Tilt Meters
<p>The measurement of inclinations is essential for the control and security of structures in elevation, both during the construction phase than in operation.<br>Thanks to the new MEMS self-compensated sensor or the force-balanced servo-accelerometer sensors, ...
MEMS Tiltsensor
<p>The MEMS Tiltsensor is based on the itmsoil In-Place Inclinometer (IPI) sensor and is designed for attaching to structures where a large tilt range is required. Mounted within the Stainless Steel housing are one or two (uniaxial or biaxial) MEMS sensors ...
MuST FBG Mono-Axial Tiltmeter
<p>The inclinometer is an inclination sensor based on fibre Bragg gratings (FBGs). It is designed to measure small variations of angle towards the vertical without the need for temperature compensation by using two FBGs in an innovative push-pull configuration. ...
MuST FBG Mono-Axial Tiltmeter
<p>The inclinometer is an inclination sensor based on fibre Bragg gratings (FBGs). It is designed to measure small variations of angle towards the vertical without the need for temperature compensation by using two FBGs in an innovative push-pull configuration. ...