Your single point of reference for all your Geotechnical Inquiries

Equipment tagged with [Multilevel Vibrating Wire Piezometer]

Total Items found:
<p>Multi-point Piezometer Strings allow for multiple Vibrating Wire Piezometers to be connected on a single cable. This facilitates the installation of fully grouted multiple piezometers. The single cable prevents vertical void channels</p>
<p>Fully grouted installation permits multiple piezometers to be simply and reliably installed in a single borehole. The piezometer string and grout pipe are placed in the borehole and cement-bentonite grout is pumped until the borehole is filled.<br>Multi-point ...
<p>Multi-Level VW Piezometers are used to monitor pore-water pressure at different zones in the borehole. The multi-level system consists of VW piezometers in multi-level housings, as shown in the photograph at right, and PVC placement pipe. The piezometers ...
<p>Allows multiple VW piezometers to be simply and reliably installed in a single borehole. It can be connected to a tough urethane jacketed Kevlar® reinforced single cable which prevents vertical void channels. Used primarily where multi-zone monitoring is ...
<p>The Model 4500MLP system overcomes the problems associated with the installation of multiple piezometers in a single drill hole. The 4500MLP is lowered into position and a spring loaded apparatus is actuated forcing specially configured piezometer filter ...
<p>The PW-ML multi-level piezometer consists of multiple piezometers connected to a single communication cable, which is in turn connected to the data acquisition system (SENSLOG) or readout (MB-3TL). </p><p>A typical installation of the multi-level piezometer ...
<p>Vibrating wire piezometers are absolute pressure transducers aimed to measure soil pore pressure. Applications include control of over-pressure in silt and clay soils, measurement of permeability and hydraulic gradients in dams and water pressure evaluation ...