Your single point of reference for all your Geotechnical Inquiries
Equipment tagged with [Water level measurements]
Total Items found:
<p>Casagrande filter unit is used to measure the water pressure in permeable soil. Filter unit is made in syntherised high density polyethylene. It is available in different models to suite all the customer applications. Filter units have threaded cap joint ...
Filed under:
Monitoring -
Ground Water Pressure
<p>The Casagrande Piezometer Tip is used with the Solinst Model 101 Water Level Meter to monitor subsurface water levels. The piezometer tip, attached to PVC riser pipe, is placed in a sand zone then sealed to the surface with a bentonite grout. The Water ...
Filed under:
Monitoring -
Ground Water Pressure
<p>The CPR-6 is a light and compact unit. It consists of a tape reel, a graduated tape, a control panel and a probe. Visual and audible signals are emitted when the probe comes in contact with water.</p><p>Control Panel: All models are supplied with a control ...
Filed under:
Monitoring -
Ground Water Pressure
<p>The FOP MicroPZ piezometer’s design is based on non-contact deflection measurement of a miniature MOMS (Micro Optical Mechanical System) pressure sensor manufactured using photolithographic techniques.</p><p>The pressure transducer has a flexible diaphragm ...
Filed under:
Monitoring -
Ground Water Pressure
<p>Light-Acoustic-solder can measure water and liquid level as well as groundwater level in well drilling, exploration drilling and hydrology. Made in Germany one can use them in the smallest holes and observation wells in depth up to 1000 m. Even with direct ...
Filed under:
Ground Investigation -
In situ testing
<p>The KLL-Light Electric Contact Meter is equipped with a signal buzzer as well as a signal lamp (signal-LED). On deploying the probe into the borehole, well, reservoir or other, the lamp and buzzer signals will indicate when the probe touches the water-level ...
Filed under:
Monitoring -
Ground Water Pressure
<p>The Geonor M-600 series piezometers are vibrating wire sensors which are installed by pushing into soft and loose soils without having to drill a borehole. As with all other Geonor vibrating wire piezome¬ters, the M-600 series offer the maximum reliabi¬lity ...
Filed under:
Monitoring -
Ground Water Pressure
The Geonor M-610 series are vibrating wire piezometers used for direct burial in embankmnets and earth / rockfill dams, for placement in boreholes, and for water level monitoring in open wells, tanks and opne bodies of water. As all other Geonor vibrating ...
Filed under:
Monitoring -
Ground Water Pressure
<p>The NIVOLIC WL consists of a chamber in which a cylindrical weight is suspended from a vibrating wire transducer. The cylinder hangs partially in the water which level has to be monitored.</p><p>Changes in the water level of the chamber modify the buoyancy ...
Filed under:
Monitoring -
Ground Water Pressure
<p>Piezo-resistive piezometers, also called semiconductor piezometers or strain gauge piezometers, are very accurate pressure transducers suitable for high frequency readings and short term applications.<br>Their robust 4-20mA output signals are easy to read ...
Filed under:
Monitoring -
Ground Water Pressure