Your single point of reference for all your Geotechnical Inquiries

Equipment tagged with [rock bolt loads]

Total Items found:
<p>The load sensing element is a spool of high strength heat-treated steel or aluminum that withstands rough handling and loading. Electrical resistance strain gauges are bonded to the periphery of the spool. The gauges are mounted in a full bridge configuration ...
<p>The Geosense® HLC-6000 series Hydraulic Anchor Load Cells consist of a sensitive pressure pad formed by joining two stiff steel discs at their periphery. The void inside the cell is filled with de-aired fluid. When load is applied to the cell the pressure ...
<p>The HYDLO consists of a sealed cell composed of two plates welded together around the periphery and filled with de-aired oil. The cell is directly connected to a pressure gauge (scale in kPa). The load applied to the cell induces an oil pressure variation, ...
<p>The Model 4910 Instrumented Rockbolt comprises a vibrating wire strain gage located inside a short length of standard threaded rockbolt or rebar. This short length is then connected via a coupling to a longer length of the same bolt material. The instrumented ...
<p>The Model 3000 Load Cell is made from an annulus of high-strength steel or aluminum, with electrical resistance strain gages in a Wheatstone Bridge configuration. The load cell is designed primarily for use on tiebacks and rockbolts, although they may be ...
<p>The Model 4900 Vibrating Wire Load Cell consists of a cylinder of high-strength steel with 3, 4 or 6 vibrating wire strain gages located around the circumference of the cell. Loads applied to the cell are measured by the vibrating wire strain gages. The ...
<p>The SGLC 7000 series load cell consists of a cylinder of high strength steel with a series of electrical resistance strain gauges connected around the periphery as a Wheatstone Bridge that compensates for unevenly distributed loads and provides a single ...
<p>Strain Gauge Load Cells incorporate from 8 to 16 high output electrical resistance strain gauges in a full bridge configuration that are bonded to a high strength steel or stainless steel spool. This arrangement compensates for both temperature effects ...
<p>Strain Gauge Load Cells measure compressive and tensile loads in rock bolts, cable anchors and tendons. They consist of a Stainless Steel cylindrical housing with up to 16 resistance strain gauges in a Wheatstone Bridge configuration. When the cell is subjected ...
<p>The Vibrating Wire Load Cell is designed to directly measure load in piles, rock bolts and between tunnel supports, as well as tension in cable anchors. The load cell comprises a set of up to six Vibrating Wire gauges mounted parallel to the cell axis and ...