Your single point of reference for all your Geotechnical Inquiries

[Water Level Indicator] Equipment

Total Items found:
CPR-6 Water Level Indicator
<p>The CPR-6 is a light and compact unit. It consists of a tape reel, a graduated tape, a control panel and a probe. Visual and audible signals are emitted when the probe comes in contact with water.</p><p>Control Panel: All models are supplied with a control ...
LIGHT-­ACOUSTIC-­SOLDER
<p>Light-Acoustic-solder can measure water and liquid level as well as groundwater level in well drilling, exploration drilling and hydrology. Made in Germany one can use them in the smallest holes and observation wells in depth up to 1000 m. Even with direct ...
Low Cost Water Level Dipmeter KLL-Light
<p>The KLL-Light Electric Contact Meter is equipped with a signal buzzer as well as a signal lamp (signal-LED). On deploying the probe into the borehole, well, reservoir or other, the lamp and buzzer signals will indicate when the probe touches the water-level ...
NIVOLIC WL Water Level Sensor
<p>The NIVOLIC WL consists of a chamber in which a cylindrical weight is suspended from a vibrating wire transducer. The cylinder hangs partially in the water which level has to be monitored.</p><p>Changes in the water level of the chamber modify the buoyancy ...
Water Level Indicator
<p>The water level indicator is used to measure water levels in standpipes and wells. The indicator consists of a probe, a cable with laser-marked graduations, and a cable reel. The hub of the cable reel contains batteries, electronics, a bright LED lamp, ...
Water Level Meter
<p>The Water Level and Temperature Meter is used to determine the water level and temperature within a borehole, piezometer pipe or sump. It consists of a stainless steel shrouded probe with a specially designed conductive probe to minimise displacement errors, ...
Water level meters
<p>Dipmeters are used for water ground level measurements in standpipes, wells and Casagrande piezometers. It is a battery powered portable device equipped with a dipping probe connected to a graduated cable wrapped on a cable reel. In contact with water the ...
Waterlevel Meters
<p>Water Level Meters are used to measure the depth of water in standpipes, wells and boreholes. The meter comprises a stainless steel probe fitted to a flexible graduated cable which is wound on a hand reel containing a transistorised switched circuit, audio ...