Your single point of reference for all your Geotechnical Inquiries

Publications tagged with [Eurocode 7]

Total Items found:
<p>Pile foundations now make up a greater percentage of foundations for new construction. That is why, an accurate calculation of pile resistance and the knowledge of its reliability has a great economic importance. A more rigorous approach has become necessary ...
Reference: Geosciences and Engineering, Vol. 3, No. 5 (2014), pp 59-69.
<p>Support to the implementation, harmonization and further development of the Eurocodes.</p>
Reference: Workshop “Eurocode 7: Geotechnical Design” Dublin, 13 - 14 June, 2013
<p>Eurocode 7(EC7) introduces the characteristic and design values with partial factors to reduce uncertainties associated with soil parameters, applying load, etc. The characteristic and design values of soil parameters according to this code were determined, ...
Reference: Journal of Civil Engineering and Construction Technology Vol. 4(3), pp. 70-80, March 2013
<p>Eurocode 7, the new European standard for geotechnical design, together with the other Eurocodes for structural design, was implemented in 2010, and relevant parts of British Standards that covered the same ground were<br />withdrawn. Since it is a single ...
Reference: Geotechnical Engineering Volume 165 Issue GE6, 2012
<p>A comparative study of pile design is presented using Eurocode 7 and an expanded reliability - based design (RBDE) method that is recently developed by the authors. A design example that has been used in the literature to illustrate Eurocode 7 is re-designed ...
Reference: ISGSR 2011 - Vogt, Schuppener, Straub & Bräu (eds) - © 2011 Bundesanstalt für Wasserbau
<p>This study aims to discuss harmonization of Design Approaches in Eurocode 7 and National Annexes from the viewpoint of reliability. Relative reliability difference of the different design results, which are estimated from respective Eurocode 7 Design Approaches, ...
Reference: ISGSR 2011 - Vogt, Schuppener, Straub & Bräu (eds) - © 2011 Bundesanstalt für Wasserbau
<p>In April 2010 the 2nd International Workshop on the Evaluation of Eurocode 7 was held in Pavia, Italy. This Workshop was organised by ETC 10 and the SC7 Maintenance Group. In preparation for the Workshop, a set of six design examples was prepared and published ...
Reference: ISGSR 2011 - Vogt, Schuppener, Straub & Bräu (eds) - © 2011 Bundesanstalt für Wasserbau
<p>The paper references case histories of failures caused by water pressure and reviews the safety provisions related to water pressure in some existing geotechnical codes. It discusses the provisions of Eurocode 7 and the way they are currently being interpreted ...
Reference: ISGSR 2011 - Vogt, Schuppener, Straub & Bräu (eds) - © 2011 Bundesanstalt für Wasserbau
<p>This paper describes how a geotechnical database may be generated from the information system (IS) of a geotechnical consulting company established in compliance with the ISO 9001, ISO 17025 QMS standards and Eurocode 7. The application of these principles ...
Reference: GEOFIZIKA VOL. 28 2011
<p>This paper advocates a holistic perception of the structural design process. By shortly reflecting the design process, it aims to identify common characteristics of &lsquo;good&rsquo; structural design: A common postulate is always the definition of, or ...
Reference: ISGSR 2011 - Vogt, Schuppener, Straub & Bräu (eds) - © 2011 Bundesanstalt für Wasserbau