Your single point of reference for all your Geotechnical Inquiries

Software

Total Items found:
Software by  geo&soft international  
<p>The program analyses the behaviour of the rock slopes under seismic conditions. It evaluates the displacements of a rock block subject to dynamic forces, on the basis of a given accelerogram.</p> <p>The use of a calculation method based on a given accelerogram ...
Software by  GeoStru Software  
<p>RockPlane is a software tool for the evaluation of localized instability rocky elements affected by seismic movements and/or by presence of water pressures within intersurface fractures. The software provides slide and overturning risk safety factors that ...
Software by  CADS  
<p>CADS ReSlope is a leading slope stability software package for calculating the factor of safety of earth slopes. The basic software module deals with unreinforced slope analysis using Bishops simplified method and circular slip surfaces. An additional optional ...
<p>The Colorado Rockfall Simulation Program (CRSP) was developed to model rockfall behavior and provide a statistical analysis of probable rockfall events at any given site. Version 4.0 is used for Windows 95, 98, and NT systems. Includes: introduction, previous ...
<p>DAN-W is a windows-based geotechnical software tool used for dynamic runout analysis of rapid landslides and rock avalanches. The program accepts user-input data in the form of path slope and initial sliding mass geometries, and material properties based ...
Software by  DC-Software  
Soil nailing acc. to Eurocode 7 (DIN EN 1997-1 with DIN 1054:2010, OENORM B 1997-1-1, NF EN 1997-1, BS EN 1997-1, UNI EN 1997-1 with NTC 2008, UNE EN 1997-1 with DB SE-C and free settings) / DIN 1054:2005 / SIA 267 / approvals
Software by  DC-Software  
Slope stability acc. to Eurocode 7 (DIN EN 1997-1 with DIN 1054:2010, OENORM B 1997-1-1, NF EN 1997-1, BS EN 1997-1, UNI EN 1997-1 with NTC 2008, UNE EN 1997-1 with DB SE-C and free settings) / DIN 1054:2005 / DIN 4084 / SIA 267
Software by  FIDES DV-Partner GmbH  
<p>The conventional stability proofs in geotechnics (earth pressure determination according to DIN 4085, embankment stability, ground failure, sliding circle according to DIN 4084, shear failure according to DIN 4017 etc..) depending upon situation indicate ...
Software by  FIDES DV-Partner  
<p>The program makes it possible to compute slope failure mechanisms due to DIN 4084. The proofs demanded therein are performed for general soil-structure systems, which may include an arbitrary number of various elements and supporting components, e.g. anchors, ...
Software by  eqorisQ  
<p>FINT (Find INdividual Trees) is an application software for detecting individual trees on the basis of a detailed surface model (such as those created on the basis of aerial or terrestrial laserscanning data). FINT delivers postitions of dominant trees, ...